Rupert Neve Designs 5211 2-channel Microphone Preamp 2-channel Microphone Preamp with Highpass Filter and Silk Circuit. the Rupert Neve Designs 5211 represents the natural evolution of what is arguably the most famous audio gear ever made. Product Features: Up to 72 dB gain in 6 dB steps with +/- 6 dB trim Phase reversal 48 V phantom power Infinitely variable LoCut from 20 Hz to 250 Hz Silk mode with variable saturation adjustment Rupert Neve Custom transformer Eight-Segment LED Level Meter Inputs: 2x XLR Outputs: 2x XLR (Line Out), 2x XLR ( -6 dB Out)

RND Logo Hoodie Whether you’re in the studio or on tour, this 80/20 hoodie is the perfect weight for layering. The R logo is embroidered on the left chest, and everything else is just black because we know you only wear black hoodies. 80% Cotton, 20% Polyester 100% Cotton Face Brushed Back Fleece Fabric weight: 250g, 7.4oz

The Horizontal Joining Kit is designed to conveniently mount two Portico Series modules in a single (1U) rack space. Includes a joining block, rear connector panel and the required screws.

The vertical Rupert Neve Designs 5012 Duo Mic Preamplifier is a dual-channel microphone pre-amplifier built with Rupert Neve's custom input and output transformer circuits.

Rupert Neve Designs Master Bus Transformer The Rupert Neve Designs Master Bus Transformer is a unique, innovative, all-analog 2-channel device that can completely transform your audio. It works wonders on in-the-box productions that can sound cold and sterile — broadening, sweetening, and punching up iron-poor tracks, stems, mixes, and masters. Product Features: High-pass filter adjustable from 15 Hz - 100 Hz 2-Band shelf EQ section with 3 octaves range and +/- 9 dB gain Colour Comp - Opto Compressor: Ratio switchable between 2:1 or 5:1, variable high-pass side-chain filter and blend control Width section for stereo base widening Super Silk section: Silk Red and Blue modes for precise enhancement of overtone structures, Harmonics control increases overall overtone content Output Trim for perfect gain staging Dimensions: 19" / 2 U

The Rupert Neve Designs Portico 5032 Single-Channel Mic Pre/Equalizer (Vertical) has an independent transformer-coupled line-level input for the EQ section.

Employing high-voltage topologies ported from Rupert Neve Designs' acclaimed 5088 console, the Portico II Channel delivers stunning transparency.

Rupert Neve Designs is expanding their 500 Series lineup with the 511 microphone preamp.

If you've been struggling with background bleed and persistent feedback problems then the Rupert Neve Designs 5045 Primary Source Enhancer is an ideal alternative to a traditional noise gate or feedback-fighting system.

The Rupert Neve Designs Portico 5043 Compressor Limiter Duo (Vertical Mount) is an analog signal processing device designed for both recording and mixing applications. It can be rackmounted vertically in an optional Rupert Neve Designs 5285-RM rack-mounting frame. For processing, the device consists of two independent compressor-limiters designated "A" and "B".

The Rupert Neve Designs Portico II Master Buss Processor lets you enhance, reshape, and polish your sound to perfection. Whether you want to add finishing touches to your master buss, level out a stereo group, or add new life to mono sound sources, the Portico II Master Buss Processor gives you the compression, limiting, and stereo field manipulation you need.

Rupert Neve Designs' Shelford 5052 rocks the definitive 1073 feature set, complete with mic pre, highpass filter, and 3-band inductor EQ. But you also get updated capabilities such as Neve's variable Silk and Texture control and simultaneous pre/post "tape" operation.

Rupert Neve Designs RNDI-S Stereo Active Transformer Direct Box Stereo Active Direct Box with Custom Transformers, Discrete Class-A FET Amplifier Circuit, Rugged Steel Chassis, Ground Lift, 3.5mm Stereo Input Jack, and LED Current Consumption Meter The Rupert Neve Designs RNDI-S fastidiously developed custom transformers and Class A biased, discrete FET amplifiers, the RNDI-S makes your stereo keyboards and guitars, bass — or any instrument with a piezo pickup — sound massive and amazing. Product Features: With Rupert Neve Custom Transmitter Input headroom of +21.5 dBU Power supply via 48 V phantom power Ground lift switch per channel 2x Input 6.3 mm jack 1x 3.5 mm mini jack 2x Thru 6.3 mm jack 2x XLR output

Rupert Neve 5015-H Single Channel Mic Pre/Compressor, combines the outstanding sound quality expected from a Rupert Neve design with the total flexibility required by modern recording studios.

Rupert Neve Designs Blank Panel for 510/500 Series

Here's your unbelievably musical compressor, courtesy of Rupert Neve Designs! When you have the 543 in your 500 Series rack, you'll instantly be impressed. After all, this mono compressor has a strong lineage.

Rupert Neve Designs RNHP Stereo Precision Headphone Amplifier 24V Stereo Headphone Amplifier with +4dBu Line, RCA, and 1/8" Stereo Inputs Rupert Neve Designs RNHP is a state-of-the-art headphone amplifier. The sonic performance and the ability to drive virtually any 'phones without compromise let you perform, mix, and savor your music with stunning clarity. Product Features: Based on the headphone amplifier section of the Rupert Neve Designs 5060 Centerpiece Three switchable inputs (XLR, RCA, mini-jack) Solid steel housing Output impedance: 0.08 Ohm at 1KHz Frequency response: +/- 0.2 dB from 10 to 12,0000 Hz Power supply: 24 V via an external 6 Watt power supply unit (included in the scope of delivery) Dimensions (W x D x H): 165 x 117 x 48 mm

The Rupert Neve Designs Portico 5033 Five-Band Equalizer (Vertical) is a half-rack unit designed to complement your signal processing chain.

Rupert Neve is a legend whose classic recording consoles defined the golden age of analog. Inspired by his sought-after vintage designs, the 3-band 551 is Mr. Neve's first 500 Series EQ.

Rupert Neve Designs 545 500 Series Primary Source Enhancer Amazingly effective at reducing feedback without degrading the sonic integrity of the source, the 545 effectively increases the level of a live mic signal by up to 20dB before the onset of feedback. With its minimalist control set, the 545’s ease of use permits quick on-the-fly adjustments during performances and also makes it a good choice even for unattended, set-it-and-forget-it scenarios. Product Features: Reduces feedback without filtering the signal Increases the level of a microphone to feedback in a live sound environment by up to 20 dB Ideal for vocals Depth and threshold adjustable Time Constant RMS Mode: A: 50ms, B: 100ms, C: 200ms, D: 750ms, E: 1.5s, F: 3s Time Constant Peak Mode: Attack time: 20mS fix Release time: A: 20mS, B: 200mS, C: 1S, D: 2S, E: 5S, F: 30S Maximum output level: +25dBu Dimensions: 19" / 1U

he 517 from Rupert Neve is a 500 Series module based on the company's Portico 5017 Mobile Pre, and provides a transformer-coupled microphone preamp, opto-coupler compressor and DI input. As with the original, the unit includes Vari-Phase, Silk processing, and DI/microphone blending capabilities.

Rupert Neve Designs 5057 Orbit Summing Mixer Fortified by Rupert’s revered Class A circuits, custom audio transformers, and Silk Red and Blue circuitry for variable harmonic saturation, the 5057 Orbit adds impressive flexibility to your setup, while enhancing lifeless, in-the-box mixes with authoritative weight, warmth, punch, depth, and clarity — without sacrificing the automated convenience of your digital audio workstation. Product Features: 16 Channel Class-A mix bus Silk Red & Blue modes with texture controls for precise control of sound characteristics Very low crosstalk for a wide stereo image and a sonic depth Cascadable via bus link with multiple 5057 units Input impedance: 16 K Ohm Frequency response: 10 to 50000 Hz: +/- 0.1 dB Max. input level at 1 kHz: +26 dBu Max. output level at 1 kHz: +26 dBu Distortion factor (from 22 Hz - 22 kHz): 0 dBu at 1 kHz: 0.003%, +20 dBu at 1 kHz: 0.0006% 2 x DB25 inputs (TASCAM standard) and XLR outputs Can be combined with other Rupert Neve Designs summing units via Buss Link Dimensions (W x D x H): 483 x 229 x 44 mm Weight: approx. 4 kg

This rugged, attractive brick-style unit powers up to five Shelford modules such as the 5051 and 5052 with +/- 24V on 4-pin connectors.

RUPERT NEVE RMP-D8, 8-Channel Dante Microphone Preamplifier The RND RMP-D8 features eight mic/line inputs outfitted with 1dB-stepped remotely controllable Class A mic preamplifiers packing 60dB of gain. Product Features: 8 Microphone / line inputs with transformers - XLR / TRS combo socket Switchable per channel: +48 V phantom power, 80 Hz high-pass filter, phase rotation and -10 dB pad AD converter with 24-bit / 192kHz resolution 8 AES digital outputs (4x XLR) 2 Ethercon connections for primary and secondary Dante network Redundant power supply unit with lockable IEC connector (2x IEC C14) USB port for firmware updates Frequency range: 30 - 45000 Hz Gain range: 60 dB Signal to noise ratio: 84.4 dB Dynamic range: 110 dB Maximum input level: +25.5 dBu Design: 19"/ 2 U

Rupert Neve Bobblehead No studio is complete without a little Rupert Neve! For over six decades, Mr. Rupert Neve was a pioneer of studio technology and a guardian of sound quality. Now he can watch over all of your recordings; standing proud, and gently nodding his head behind the world’s smallest 5088 frame. This slightly-smaller-than-real-life Rupert measures just over 7″ (17.8cm) and comes equipped with his trusty transformer in hand. ‘Rupert Neve: The Bobblehead’ comes in an 8″ x 4.5″ x 4.5″ full color box for safekeeping and collecting. Make him a part of your studio today!

Rupert Neve Designs Power Supply for Up to 25 Shelford Series Units (+/-24V, 2RU)

Rupert Neve Designs 5034 Newton Channel Strip, Mono Channel Strip with Class A Mic/Line Preamp, 3-band EQ, Compressor, Silk Harmonic Enhancement, Custom Transformer Outputs, and 8-segment LED Meters. Product Features: With microphone preamp, EQ and compressor Class-A microphone preamp 72 dB gain including 6 dB fine-tuning 48 V phantom power and phase switch switchable High-pass filter adjustable in 31 steps from 20 to 250 Hz 3-Band EQ with 31-step potentiometers Fast VCA compressor with +20 dB make-up gain and pre-EQ/post-EQ option Variable Silk-Red and Silk-Blue circuits for amplifying 2nd and 3rd order harmonics Silk-Red mode enhances the harmonic content of highs and high mids Silk-Blue mode amplifies the harmonic content of basses and low-mids Specially designed transformer output stage Separate -6 dBu XLR output: Newton Channel can be fully modulated to achieve more harmonics without overdriving the next unit in the chain Main Out and -6 dB Out can be used simultaneously Stereo link via 6.3 mm jack possible Dimensions (W x D x H): 483 x 206 x 45 mm

Rupert Neve Designs Fader Socks These socks are 80% cotton, 15% nylon, and 5% spandex for a soft and slightly stretchy feel. They’re technically “one size fits all, men’s 9-11”, but we’ve found that they fit all but the very tiniest or very largest feet. Artwork: Faders + pan pots + meters all the way around, “R” logo on cuffs, “RUPERT NEVE DESIGNS” under the foot.

The Rupert Neve Designs 5211-RM Half Rack Joining Kit is designed to conveniently mount a single Portico Series Module (sold separately) in a single (1U) rack space. It includes a blank front panel and the required mounting screws.

The horizontal Rupert Neve Designs 5012 Duo Mic Preamplifier is a dual-channel microphone pre-amplifier built with Rupert Neve's custom input and output transformer circuits.

Rupert Neve Designs 5254 Shelford Dual Diode Bridge Compressor 2-channel Diode-Bridge Compressor with Stepped Controls, Sidechain Highpass Filter and Inserts, Onboard Parallel Processing, and Stereo Linking Product Features: Custom transformer and class A line amplifier Stereolink or 2x mono Integrated parallel compression Input impedance: 10 kOhm Output impedance: 40 ohm Maximum input level (+4 dBu selected): +26.7 dBu Maximum output level: +26.7 dBu Noise floor: (22 Hz - 22 kHz BW): -104 dBu Frequency response (10 Hz to 120 kHz): +/- 0.25 dB THD+N @1 kHz @ maximum level (22 Hz - 22 kHz BW): 0.0008% Compressor Noise specifications: Noise at 0dB make-up gain (22 Hz - 22 kHz BW): -84.5 dBu, noise at +20dB make-up gain (22 Hz - 22 kHz BW): -64.5 dBu Detented control with 31 steps Input/output connectors: XLR Sidechain send/return: 6.3 mm jack Groundlift switch Format: 19"/ 1 U Weight: Approx. 4 kg

The Rupert Neve Designs Portico 5032 Single-Channel Mic Pre/Equalizer (Horizontal) has an independent transformer-coupled line-level input for the EQ section.

Rupert Neve Designs 5285-RM 9-way Vertical Frame

The Portico 5024 Quad Mic Preamp from Rupert Neve Designs is a four-channel microphone preamplifier that offers a versatile way to connect microphones, instruments, and line-level sources. Channels One and Two feature 1/4" Hi-Z instrument inputs, and a 1/4" THRU output to pass the connected signal to an external piece of gear.