Rupert Neve Designs Fader Socks These socks are 80% cotton, 15% nylon, and 5% spandex for a soft and slightly stretchy feel. They’re technically “one size fits all, men’s 9-11”, but we’ve found that they fit all but the very tiniest or very largest feet. Artwork: Faders + pan pots + meters all the way around, “R” logo on cuffs, “RUPERT NEVE DESIGNS” under the foot.

Rupert Neve Designs 5254 Shelford Dual Diode Bridge Compressor 2-channel Diode-Bridge Compressor with Stepped Controls, Sidechain Highpass Filter and Inserts, Onboard Parallel Processing, and Stereo Linking Product Features: Custom transformer and class A line amplifier Stereolink or 2x mono Integrated parallel compression Input impedance: 10 kOhm Output impedance: 40 ohm Maximum input level (+4 dBu selected): +26.7 dBu Maximum output level: +26.7 dBu Noise floor: (22 Hz - 22 kHz BW): -104 dBu Frequency response (10 Hz to 120 kHz): +/- 0.25 dB THD+N @1 kHz @ maximum level (22 Hz - 22 kHz BW): 0.0008% Compressor Noise specifications: Noise at 0dB make-up gain (22 Hz - 22 kHz BW): -84.5 dBu, noise at +20dB make-up gain (22 Hz - 22 kHz BW): -64.5 dBu Detented control with 31 steps Input/output connectors: XLR Sidechain send/return: 6.3 mm jack Groundlift switch Format: 19"/ 1 U Weight: Approx. 4 kg

The horizontal Rupert Neve Designs 5012 Duo Mic Preamplifier is a dual-channel microphone pre-amplifier built with Rupert Neve's custom input and output transformer circuits.

Rupert Neve Designs 5285-RM 9-way Vertical Frame

The Rupert Neve Designs Portico 5032 Single-Channel Mic Pre/Equalizer (Horizontal) has an independent transformer-coupled line-level input for the EQ section.

Rupert Neve Designs MBC Dual-path A/D Converter & Limiter Rupert Neve Designs’ Master Bus Converter (MBC) sets a new standard for reference-grade 24-bit/192kHz A/D conversion technology. It also incorporates RND’s latest Active Compound Release Analog Limiter, which lets you drive hotter levels with fewer artifacts than plug-ins and ensure clip safety for tracking or broadcast. Product Features: 24 Bit / 192 kHz converter Converter input with switchable signal path: transformerless class A signal path or via interstage audio transformer with RND Silk Red and Blue circuit Analog limiter section with class A line amplifier stage up to 20 dB Controllable threshold and release Switchable sidechain connection with tunable high-pass filter from 20 - 250 Hz Limiter can be used either in dual mono or stereo mode Analog inputs: 2x XLR Digital outputs: AES, S / PDIF, TOSLINK Word Clock In / Out 2 x 22-segment level LED meters 2 x 8-segment gain reduction LED meters Peak hold option Format: 19"/ 1 U

The Portico 5024 Quad Mic Preamp from Rupert Neve Designs is a four-channel microphone preamplifier that offers a versatile way to connect microphones, instruments, and line-level sources. Channels One and Two feature 1/4" Hi-Z instrument inputs, and a 1/4" THRU output to pass the connected signal to an external piece of gear.

The Rupert Neve Designs Shelford 5051 Inductor EQ and Compressor combines the classic 3-band EQ from Rupert Neve's vintage circuit designs with the flexibility and power of the Portico II compressor. Using a fully discrete class-A signal path combined with high-performance input and output transformers, the combination EQ and compressor upholds the world renown reputation of the master circuit designer.

The Rupert Neve Designs Portico 5043 Compressor Limiter Duo (Horizontal Mount) is an analog signal processing device designed for both recording and mixing applications.

Rupert Neve Designs brings their acclaimed tape emulation (from their Portico 5042) to the 500 Series format with the 542 module. Add the thick, musical sound of tape to your tracks, with the added bonus of Neve's Silk/Texture circuit to fine-tune your sound. Once you hear the 542, we're pretty sure you won't want to mix without it.

Rupert Neve Designs RNDI-M Active Transformer Direct Interface DI Box with Class A Amplifiers, Neve Custom Transformers, and +20.5dBu Maximum Input Level. The RNDI-M handles input levels up to a massive +20.5dBu with a low-impedance, transformer-coupled output stage that makes it applicable for driving longer lines on a wide variety of sources, including guitars, basses, synths, drum machines, and more. Rupert Neve’s custom transformers are matched with Class A amps, resulting in sound reproduction below 5Hz and above 90kHz, with a smooth and natural quality throughout. Product Features: Custom transformer for classic Neve sound Discrete Class A FET amplifier High input headroom of +20.5 dBu Max. output level: +11.5 dBu Input impedance: 2.2 mOhm Robust steel housing Switchable ground lift THRU output: 6.3 mm jack

Now there's a direct box that delivers this magic: the Rupert Neve Designs RNDI.

Rupert Neve Designs 5025 Dual Shelford Microphone Preamplifier Product features: Class A input stage with specially developed transformers Up to 72 dB gain in 6 dB steps with +/- 6 dB trim Phase switch 48 V phantom power Continuously adjustable LoCut from 20 Hz to 250 Hz Silk Red and Blue circuitry Silk Red mode boosts harmonic content of highs and high mids Silk Blue mode boosts harmonic content of bass and low mids Rupert Neve custom output transformer VU meter Inputs: 2x XLR Outputs: 2x XLR (line out) 2x XLR ( -6 dB out) Dimensions: 19" / 1U

The Rupert Neve Designs Portico 5033 Five-Band Equalizer (Horizontal) is a half-rack unit designed to complement your signal processing chain.

Rupert Neve Designs RNDI-8 8-channel Active Direct Box 8-channel Active Direct Box with Custom Transformers, Discrete FET Input Amplifiers, and Per-channel Ground Lifts and -10dB Pads The RNDI-8 makes anything you plug into sound massive and amazing, yielding top-grade sound from 5Hz to far beyond 90kHz. You also get flexible per-channel ground lifts and individual -10dB pads to guarantee hum- and distortion-free operation. Product Features: Rupert Neve Custom Transformer Max input level +21 dBu (+31 dBu with pad on) Power supply via 48V phantom power per channel Ground lift and pin 1 isolate per channel to eliminate hum pickup -10dB pad 6.3mm Jack In 6.3mm Jack Thru XLR out Dimensions: 19" / 1U

The Portico 5100 External Power Supply from Rupert Neve Designs is an external power supply designed to power up to two Portico series modules.

Rupert Neve 5015-V Single Channel Mic Pre/Compressor, combines the outstanding sound quality expected from a Rupert Neve design with the total flexibility required by modern recording studios.

The Rupert Neve Designs 5059 Satellite 16 x 2+2 Summing Mixer is an analog mixer with 16 inputs over two 25-pin D-sub cables and dual stereo XLR outputs housed in a 2U rack-mountable chassis. The mixer features class-A amplifiers and a custom transformer circuit design by renowned electronics engineer Rupert Neve.

Rupert Neve Designs 535 500 Series Diode Bridge Compressor 500 Series Diode-Bridge Compressor with Stepped Controls, Onboard Parallel Processing, Sidechain Highpass Filter, and Stereo Linking Rupert Neve Designs' 535 is a 500 Series diode-bridge compressor based on the topologies found in classic Neve designs such as the 2254.The 535 serves up the attitude-packed, in-your-face sound of Rupert Neve's renowned diode-bridge compressors, but with modern precision and flexibility which makes it ideal on any source. Product Features: Threshold range: Adjustable from -25 dB to +20 dB in 31 rasterized steps Ratio: Switchable from 1.5: 1 to 8: 1 in six steps Timing rotary switch: Six-digit rotary switch, with which the attack and release times of the compressor are adjusted Fast switch: Shares the attack and release times of the timing presets Blend knob to mix dry and wet signal Link function Sidechain HPF at 150 Hz Rasterized gain amplifier from -6 dB to +20 dB in 31 steps 8-Segment LED meter for level and level reduction Type: 500 Module

The Rupert Neve Designs Portico 5017 DI/Pre/Comp Mobile Channel with Variphase Control is designed for studio recording, live recording, and live performance applications.

Rupert Neve Designs R10 10 Space 500 Series Rack Rupert Neve Designs R10 500 Series chassis is a 10-space, steel rack enclosure that sports XLR and 1/4" TRS I/O for compatibility with any studio setup. Product features: XLR and 6.3 mm jack input and output per channel LED display for power consumption VCA buses in channels 1-2, 3-4, 5-6, 7-8, 9-10 can be activated in pairs via ink jumpers Integrated power supply 90 - 240V Type: 19"