-
EPIPHONE ELECTAR 15B BASS COMBO AMP
The Electar-15B 15W bass combo amp features a powerful 10"speaker rather than the typical 8"speaker found in other bass packs. The Epiphone Electar-15B Bass Amp is perfect for recording, playing small clubs, or just jamming around the house. This combo amp features controls for volume, hi, mid, and low EQ, a standard ¼"input, 3.5mm stereo aux in and stereo phones out, a ¼"extension speaker out, and a ¼"line out--an array of easy professional options you won't find in other bass amps.EPIPHONE ELECTAR 15B BASS COMBO AMP -
Hartke HD75 1x12" 75-watt Bass Combo Amp
25% Off
Hartke proves that great tone doesn't need to cost a ton with the Hartke HD75 bass combo amp. Pushing 75 watts of power through a single 12" speaker and 1" tweeter, the HD75 is perfect for any rehearsal space or gig. When you're gigging out and about, durability is a must, and the HD75 will easily withstand being lugged from gig to gig. The Hartke HD75 bass combo amp is a great choice when you don't need a ton of power, but you also don't want to sacrifice tone.HARTKE-HYDRIVE-75W-COMBO-12 -
-
-
Hartke HyDrive 5210C - Bass Combo
25% Off
HyDrive transducers represent a revolutionary improvement in bass speaker technology and a major leap forward, fusing paper and aluminum in a roadworthy speaker design that is more robust and efficient than anything available.5210C -
Hartke 210XL Bass Cabinet
32% Off
Professionals choose the XL Series because of its carefully calibrated and tuned cabinet design and high quality aluminum-cone drivers. XLs produce a smooth response along with the clear, punchy attack that changed the sound of bass. Each cabinet is built tough with a shockproof metal grill, reinforced corners, recessed carry handles and a rugged covering.210XL -
Hartke HyDrive HD410 - 1,000-watt 4x10" Bass Cabinet
25% Off
The Hartke HyDrive HD410 weighs in at a mere 63 pounds, yet there's nothing lightweight about its performance. This 1,000-watt cabinet delivers clean output and even response, thanks to its two-piece composite cones. Double-roll curvilinear surrounds prevent over-excursion, yielding extremely smooth mids, as well as clear fundamentals and natural overtones. Experience tight, chest-thumping low end and superior projection, by virtue of the HD410's round-wire voice coils and sealed cabinet design. Beyond that, this road-ready bass cab features solid plywood construction with extensive bracing and dado joints, as well as a perforated steel grill and steel corners. The HyDrive HD410 is loaded with every feature a modern bassist could want.HD410 -
Hartke LH1000 - 1000-Watt Bass Head
25% Off
The Hartke LH1000 is a 1000-watt bass amplifier head featuring a classic 12AX7 Class A tube front end with a solid-state output. Portable and roadworthy, the Hartke LH1000 offers both treble and bass shelving, so you can give its warm tone the edge you want. You can also tweak the bright and limiter switches to shape your sound even further. Rackmount it for the ultimate in convenience, and then plug in - there is a front-panel XLR balanced direct output, a rear-panel 1/4" effects loop, and a 1/4" output connector on the Hartke LH1000.LH1000 -
Hartke LH500 - 500-Watt Bass Head
The Hartke LH500 is a 500-watt bass amplifier head featuring a classic 12AX7 Class A tube front end with a solid-state output. Portable and roadworthy, the Hartke LH500 offers both treble and bass shelving, so you can give its warm tone the edge you want. You can also tweak the bright and limiter switches to shape your sound even further. Rackmount it for the ultimate in convenience, and then plug in - there is a front-panel XLR balanced direct output, a rear-panel 1/4" effects loop, and 1/4" output connectors on the Hartke LH500.LH500 -
Hartke TX600 - Bass Amplifier
Never comprising tone, the Hartke TX600 merges a classic tube preamp section with modern lightweight, Class D amplifier technology. This combination yields a bass amplifier with the warmth and character of a traditional amp, not to mention 600 watts of power, in a ultra-portable enclosure weighing only seven pounds. The TX600 was designed for performance, and you'll quickly find how easily and effectively it performs.hartke-tx600-bass-amplifier -
Markbass Little Mark 250 Bass Amplifier – Black Line Compact Bass Amp
The Markbass Little Mark 250 Bass Amplifier – Black Line is a compact, professional bass amp delivering 250W of clear, punchy, and dynamic sound. Featuring precise EQ controls, durable construction, and versatile connectivity, it is ideal for live gigs, rehearsals, and studio sessions. Lightweight and portable, the Little Mark 250 provides reliable, high-quality bass amplification for musicians in the UAE and worldwide.
AMP-LITTMARK-250-BK -
Markbass Minimark 802 N 300 Bass Amplifier – Compact 300W Bass Combo
The Minimark 802 N 300 Bass Amplifier delivers 300W of powerful, clear, and punchy bass tone in a compact design. Perfect for practice, rehearsals, and small live performances, it provides tight low-end, smooth mids, and articulate highs. Its lightweight and portable construction ensures reliable professional-grade sound for bassists in the UAE and worldwide.
MBC105073 -
Markbass Standard 104HR 8 Ohm Bass Cabinet – 4x10” High-Power Bass Speaker Cabinet
The Markbass Standard 104HR 8 Ohm Bass Cabinet delivers powerful, punchy, and highly responsive bass projection through its 4x10” speaker design. Built for stage performance, studio recording, and professional touring, it offers tight lows, defined mids, and clean highs, making it suitable for modern and traditional bass styles. With strong output, excellent clarity, and a portable cabinet structure, this 8 Ohm cab is ideal for bassists in the UAE and worldwide who need reliable high performance with exceptional tone.
MBL100040Y -
Markbass Marcus Miller 104 Bass Cabinet – 4x10” Signature Bass Speaker Cabinet
The Markbass Marcus Miller 104 Bass Cabinet delivers powerful, dynamic, and clear bass tone in a signature 4x10” speaker design. Engineered in collaboration with Marcus Miller, it provides tight lows, smooth mids, and crisp highs, making it ideal for live performances, rehearsals, and studio recording. Lightweight and stage-ready, this cabinet offers professional-grade sound for bassists in the UAE and worldwide seeking the Marcus Miller signature tone.
AMP-BM-MILL-104CAB -
Markbass MB58R 104 Energy 4 Ohm Bass Cabinet – 4x10” High-Power Bass Speaker Cabinet
The Markbass MB58R 104 Energy 4 Ohm Bass Cabinet delivers powerful and dynamic bass tone in a 4x10” high-output speaker design. Its 4 Ohm configuration ensures compatibility with a wide range of Markbass amp heads, making it ideal for live performances, rehearsals, and studio work. Lightweight yet robust, the Energy 104 offers professional-grade sound and strong projection for bassists in the UAE and worldwide.
MBL100114 -
MARKBASS NANO MARK II- BASS HEAD AMP
Product code: MBH110101Z NANO MARK II TECHNICAL FEATURES INPUTS INPUT impedance: 1 Mohm, max. voltage: 15 Vpp RETURN impedance: 33 Kohm, max. voltage: 10 Vpp CONTROLS GAIN –60 dB to +23 dB range PRE/POST EQ (for line out) switch on rear panel GROUND LIFT switch on rear panel FOOTSWITCH (not included) for flat/scooped switch MASTER VOLUME EQUALIZATION LOW: center frequency 60 Hz; level: ±16 dB MID LOW: center frequency 360 Hz; level: ±16 dB MID HIGH: center frequency 800 Hz; level: ±16 dB HIGH: center frequency 5 kHz; level: ±16 dB OUTPUTS SEND EFFECTS: unbalanced, max. voltage 20 Vpp (Pre Eq) LINE OUT balanced XLR, Maximum Voltage 10 Vpp, Impedance 600 ohm SPEAKER OUT: speakon/1/4” combo DIMENSIONS AND WEIGHT WIDTH: 7.87 in. / 20 cm DEPTH: 8.27 in. / 21 cm HEIGHT: 2.09 in. / 5.3 cm WEIGHT: 3.20 lbs / 1.45 kg OUTPUT POWER 300W RMS @ 4 ohm, 150W RMS @ 8 ohm POWER REQUIREMENT 100/120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale) OTHERS BI-BAND LIMITER FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MIDMARKBASS NANO MARK II- BASS HEAD AMP -
MARKBASS LITTLE MARCUS 58R-BASS AMP HEAD
LITTLE MARCUS 58R Product code: MBH110122Z The new LITTLE MARCUS 58R is ready to replicate the worldwide success of Marcus Miller signature. It features all the connections and controls on the front panel leaving on the rear panel only the speaker outs and AC power socket, offering optimal ergonomics and making everything more practical. TECHNICAL FEATURES: PREAMP Solid State POWER AMP MPT (MARK PROPRIETARY TECHNOLOGY) POWER 500W@4ohm / 300W@8ohm EQ1 ULTRALOW – LOW – MID/LOW – MID/HIGH – HIGH EQ2 MILLERIZER and OLD SCHOOL filters OTHER FEATURES XLR Line Out with Level Control and Pre/Post EQ and GND Lift switches BI-BAND LIMITER | MUTE switch FX Send/Return Footswitch (optional) to turn on/off EQ1 and Eq2 DIMENSIONS 10.87”/ 27.6 cm (w); 3.27”/ 8.3 cm (h); 10.08”/ 25.6 cm(d) WEIGHT 4.78 lbs / 2,17 kgMARKBASS LITTLE MARCUS 58R-BASS AMP HEAD -
MARKBASS MB58R 102 XL ENERGY- BASS CABINET
The Markbass MB58R 102 XL ENERGY is a lightweight, high-performance 2x10" bass cabinet designed for musicians seeking powerful sound and easy portability. Equipped with two 10" neodymium custom speakers and a 1" driver with horn, it delivers 400W RMS of clear, punchy tone across a wide frequency range.
Key Features:
Speakers: 2x10" Markbass neodymium custom
Tweeter: 1" driver with horn
Power Handling: 400W RMS
Frequency Response: 40Hz – 20kHz
Sensitivity: 101 dB SPL
Crossover Frequency: 3.5 kHz
Impedance: Available in 4 or 8 ohms
Dimensions: 57.8 cm (W) x 60 cm (H) x 47 cm (D)
Weight: Approximately 14.6 kg (32.2 lbs)
MBL100124Y -
MARKBASS MB58R 104 Pure Box 4ohm
Markbass MB58R 104 PURE Box (4 Ω)
The Markbass MB58R 104 PURE (4 Ω) is a high-performance 4x10” bass cabinet designed for players who want powerful sound with minimal weight. Equipped with neodymium custom speakers and a hi-fi tweeter, it delivers clear highs, strong mids, and deep low-end. With 800 watts of power handling and a rear-ported, eco-friendly enclosure, this cabinet is perfect for stage, studio, or rehearsal environments where portability and clarity matter.
Specifications
Speaker Configuration: 4 × 10″ neodymium custom speakers
Tweeter: Hi-Fi tweeter
Power Handling: 800 watts RMS
Frequency Response: 40 Hz – 20 kHz
Crossover Frequency: 3.5 kHz
Sensitivity: 103 dB SPL
Impedance: 4 Ohms
Enclosure: Rear-ported, biodegradable material
Dimensions: 57.8 × 60 × 47 cm
Weight: 16.1 kg (35.5 lb)
MBL100117 -
MARKBASS MB58R 104 PURE Box 8ohm
Markbass MB58R 104 PURE Box (8 Ω)
The Markbass MB58R 104 PURE is a rugged yet ultralight 4×10″ bass cabinet built for players who demand high output and effortless transport. It features neodymium custom speakers paired with a hi‑fi tweeter for detailed highs and quick transient response. With a rear-ported enclosure and biodegradable construction materials, this cabinet delivers 800 W RMS power handling without heavy weight, making it an excellent choice for gigs, rehearsal, or compact rig setups.
Specifications
Speaker configuration: 4 × 10″ neodymium custom speakers
Tweeter type: Hi‑fi tweeter
Power rating: 800 W RMS (AES standard)
Frequency response: approx. 35 Hz – 20 kHz
Crossover frequency: around 3.5 kHz
Sensitivity: approximately 103 dB SPL
Impedance: 8 Ω (also available in 4 Ω)
Enclosure: rear‑ported, eco‑friendly composite material
Dimensions: about 57.8 × 60 × 47 cm (22.8″ × 23.6″ × 18.5″)
Weight: ~35.5 lb (≈ 16.1 kg)
MBL100104 -
MB58R 151 ENERGY
Deep Tone. Ultra-Lightweight. Road-Ready.
The MB58R 151 ENERGY delivers rich, full-bodied bass in a compact, eco-friendly design. Featuring a custom 15" neodymium speaker and a 1" high-frequency driver, this cabinet offers 400W RMS power handling, ensuring clarity and punch across the frequency spectrum. Its innovative construction provides an exceptional power-to-weight ratio, making it ideal for gigging musicians seeking portability without compromising sound quality.Key Features:
Speaker Configuration: 1×15" Markbass Neodymium Custom
Tweeter: 1" driver with custom horn
Power Handling: 400W RMS (AES Standard)
Frequency Response: 40 Hz – 20 kHz
Crossover Frequency: 3.5 kHz
Sensitivity: 100 dB SPL
Impedance: 8 Ohms
Construction: Eco-friendly, ultra-lightweight materials
Dimensions: 57.8 cm (W) × 60 cm (H) × 47 cm (D)
Weight: 15.2 kg
MBL100101Y -
MB58R 122 ENERGY
Powerful Tone. Exceptional Portability. Eco-Friendly Design.
The Markbass MB58R 122 ENERGY is a high-performance bass cabinet that combines robust sound output with a lightweight, environmentally conscious design. Equipped with two 12" neodymium custom speakers and a 1" driver with a horn, this cabinet delivers 800W RMS of rich, full-range tone suitable for various musical applications. Its innovative construction ensures durability while keeping the weight at just 17.5 kg, making it an ideal choice for gigging musicians.
Key Features:
Speaker Configuration: 2×12" Markbass Neodymium Custom
Tweeter: 1" Driver with Horn
Power Handling: 800W RMS (AES Standard)
Frequency Response: 45 Hz – 20 kHz
Crossover Frequency: 3.5 kHz
Sensitivity: 103 dB SPL
Impedance Options: 4 or 8 Ohms
Reflex: Rear
Dimensions: 57.8 cm (W) × 60 cm (H) × 47 cm (D)
Weight: 17.5 kg
Construction: Eco-friendly, lightweight materials
Origin: Made in Italy
MB58R 122 ENERGY -
MARKBASS MB58R 104 ENERGY BASS CABINET
MB58R 104 ENERGY Product code: MBL100098Y The MB58R 104 ENERGY features 4x10"Markbass Neodymium custom speakers and 1"driver with horn, boasts an impressive 800W of power handling and weights 36.4 lbs / 16.5 kg . This cabinet works great on its own, plus the 8ohm version makes up an amazing stack when added to another Markbass 8 ohm cab (for example, another MB58R 104 ENERGY or a MB58R 151 ENERGY). TECHNICAL FEATURES: SPEAKER SIZE 4×10” Markbass Neodymium Custom TWEETER 1” driver w/custom horn CAB POWER HANDLING (AES STANDARD) 800W RMS CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONCE 35Hz to 20KHz SENSITIVITY DB SPL 103dB IMPEDANCE 8 or 4 ohms REFLEX Rear DIMENSIONS 22.76”/ 57.8cm (w); 23.62”/ 60 cm (h); 18.50”/ 47 cm (d) WEIGHT 36.4 lbs / 16.5 kgMARKBASS MB58R 104 ENERGY BASS CABINET -
MARKBASS NEW YORK 121-COMPACT CABINET
Product code: MBL100026Y New York 121 The Mini CMD 121P, has found its perfect companion! This is our lightest and most compact cabinet ever, and serves as a great extension cabinet for our combos: with this cab added, your combo turns into a 500W rig! This is also a small but mighty match for any of our 250-500W heads. SPECIFICATIONS: Power handling 400w Series New york Size S Speaker config 1x12" Impedance 8ohm Tweeter Piezo Tuned port Rear TECHNICAL FEATURES IMPEDANCE 8 ohms SPEAKER SIZE 1×12 in. BASS PORT rear TWEETER piezo POWER HANDLING 400W RMS (AES Standard) CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONSE 45 Hz to 18 kHz SENSITIVITY 100 dB SPL WEIGHT 29.98 lbs / 13.6 Kg WIDTH 14.96 in. / 38 cm HEIGHT 16.73 in. / 42.5 cm DEPTH 14.17 in. / 36 cmMARKBASS NEW YORK 121-COMPACT CABINET -
MARKBASS CMD 102P IV-BASS COMBO AMPLIFIER
Product code: MBC105054Z CMD 102P IV This front-ported 2x10 combo is a great option for gigging bassists who want to cut through the mix without a big rig. TECHNICAL FEATURES: INPUTS INPUT impedance: 1 Mohm, max. voltage: 9 Vpp RETURN impedance: 22 Kohm, max. voltage: 10 Vpp CONTROLS GAIN –46 dB to +23 dB range LINE OUT level control on front panel PRE/POST EQ (for line out) switch on rear panel GROUND LIFT switch on rear panel MUTE SWITCH MASTER VOLUME EQUALIZATION LOW: center frequency 68 Hz; level: ±16 dB MID LOW: center frequency 360 Hz; level: ±16 dB MID HIGH: center frequency 800 Hz; level: ±16 dB HIGH: center frequency 10 kHz; level: ±16 dB OLD SCHOOL: max cut range: 250 Hz – 20 kHz 3 WAY SWITCH: flat/scooped-mid/FSW OUTPUTS SEND EFFECTS: unbalanced, max. voltage 20 Vpp TUNER OUT: unbalanced, max. voltage 2 Vpp LINE OUT balanced XLR, max. voltage 20 Vpp SPEAKER OUT: speakon/1/4” combo, 1/4”* OTHERS BI-BAND LIMITER FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MID OUTPUT POWER 500W RMS @ 4 ohm, 300W RMS @ 8 ohm POWER REQUIREMENT: 100V; 120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale) SPEAKER 2×10″ TWEETER piezo BASS PORT front IMPEDANCE 8 ohms SENSITIVITY 101 dB SPL SPEAKER POWER HANDLING 400W RMS (AES Standard) FREQUENCY RESPONSE 40 Hz to 18 kHz CROSSOVER FREQUENCY 3.5 kHz WEIGHT 37.7 lbs / 17.1 Kg WIDTH 23.03 in. / 58.5 cm HEIGHT 18.5 in. / 47 cm DEPTH 18.7 in. / 47.5 cmMARKBASS CMD 102P IV-BASS COMBO AMPLIFIER -
MARKBASS CMB 101 BLACK LINE- COMBO AMP
CMB 101 Black Line Product code: MBC105104Z The CMB101 Black Line is an amazing entry level 40W combo, the perfect choice for those who want to start with the right sound. It's compact, light, portable and the sound it delivers is superior to any other practice amp at this price thanks to Markbass tone and quality. It features a headphone output, and an aux input for connecting your favourite media players to mix with your bass sound, letting you practice anywhere, anytime. TECHNICAL FEATURES: SPEAKER 1×10” EQ 4-band CONTROLS GAIN | MASTER VOLUME SCOOPED and BOOST switches OTHERS AUX IN HEADPHONE OUT PREAMP OUT OUTPUT POWER 40W DIMENSIONS 14.76”/ 37.5cm (w); 14.37”/ 36.5 cm (h); 10.63”/ 27 cm (d) WEIGHT 21.38 lbs / 9.7 kgMARKBASS CMB 101 BLACK LINE- COMBO AMP -
MARKBASS MARCUS MILLER CMD 101 MICRO 60 BASS COMBO AMP
MARCUS MILLER CMD 101 MICRO 60 Product code: MBC105036Z This compact combo amp section also features gain and master controls, 3- band EQ, aux in, headphone out, speaker on/off switch. TECHNICAL FEATURES: PREAMP Solid State AMP OUTPUT POWER (MPT) 60W @ 4 ohm / 45W @ 8 ohm CONTROLS Gain – Master EQ (±16DB) LOW (40 HZ) | MID (800HZ) | HIGH (6 KHZ) SPEAKER 1 x 10″ Markbass Custom TWEETER Piezo SPEAKER POWER HANDLING (AES STANDARD) 200W RMS REFLEX Rear IMPEDANCE 8 ohms CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONCE 45Hz to 18KHz OTHER FEATURES Aux IN – Headphone OUT XLR Line Out – Speaker ON/OFF Output for external cab (minimum load 8Ω) Dual Voltage Switch 120V/240V* *(not available on the 100V version manufactured for Japan) DIMENSIONS 14.56”/ 37cm | 13.14”/ 33,4cm | 14.40”/ 36,6cm WEIGHT 25.6lbsMARKBASS MARCUS MILLER CMD 101 MICRO 60 BASS COMBO AMP -
Markbass Standard 121HR Bass Cabinet
The Standard 121 HR is a 1x12" rear tuned ported cabinet with a warm, focused and natural sound.
It’s a perfect choice for many stage situations as its wedge design allows to use it either as a floor monitor or on its side in standard position.
With its 400 watts of power handling it can be used as a standalone with a Markbass head or as extension cabinet for our topselling Mini CMD 121P combo, it’s a versatile and very portable solution (weights only 29.1lbs/13.2Kg) that covers all of your needs and also ideal for double bass and acoustic bass as sound the of acoustic instruments is faithfully reproduced by this amazing cabinet.MBH100055Y -
MARKBASS CMB 121 BLACKLINE COMBO AMP
CMB 121 Black Line Product code: MBC105105Z The CMB121 Black Line is an amazing entry level 150W combo, the perfect choice for those who want to start with the right sound and have enough power for both rehearsals and gigs. It delivers a sound superior to any other practice amp at this price, thanks to Markbass tone and quality. It features a headphone output, and an aux input for connecting your favourite media players to mix with your bass sound, letting you practice anywhere, anytime. TECHNICAL FEATURES: SPEAKER 1×12” EQ 4-band CONTROLS GAIN | MASTER VOLUME SCOOPED and BOOST switches OTHERS AUX IN / HEADPHONE OUT BALANCED LINE OUT / SEND-RETURN OUTPUT POWER 150W DIMENSIONS 17.32”/ 44 cm (w); 17.32”/ 44 cm (h); 14.17”/ 36 cm (d) WEIGHT 35.27 lbs / 16 kgMARKBASS CMB 121 BLACKLINE COMBO AMP
