This website uses cookies to ensure you get the best experience on our website. Read more
-
MARKBASS MB58R 104 Pure Box 4ohm
Markbass MB58R 104 PURE Box (4 Ω)
The Markbass MB58R 104 PURE (4 Ω) is a high-performance 4x10” bass cabinet designed for players who want powerful sound with minimal weight. Equipped with neodymium custom speakers and a hi-fi tweeter, it delivers clear highs, strong mids, and deep low-end. With 800 watts of power handling and a rear-ported, eco-friendly enclosure, this cabinet is perfect for stage, studio, or rehearsal environments where portability and clarity matter.
Specifications
Speaker Configuration: 4 × 10″ neodymium custom speakers
Tweeter: Hi-Fi tweeter
Power Handling: 800 watts RMS
Frequency Response: 40 Hz – 20 kHz
Crossover Frequency: 3.5 kHz
Sensitivity: 103 dB SPL
Impedance: 4 Ohms
Enclosure: Rear-ported, biodegradable material
Dimensions: 57.8 × 60 × 47 cm
Weight: 16.1 kg (35.5 lb)
MBL100117 -
MARKBASS MB58R 104 PURE Box 8ohm
Markbass MB58R 104 PURE Box (8 Ω)
The Markbass MB58R 104 PURE is a rugged yet ultralight 4×10″ bass cabinet built for players who demand high output and effortless transport. It features neodymium custom speakers paired with a hi‑fi tweeter for detailed highs and quick transient response. With a rear-ported enclosure and biodegradable construction materials, this cabinet delivers 800 W RMS power handling without heavy weight, making it an excellent choice for gigs, rehearsal, or compact rig setups.
Specifications
Speaker configuration: 4 × 10″ neodymium custom speakers
Tweeter type: Hi‑fi tweeter
Power rating: 800 W RMS (AES standard)
Frequency response: approx. 35 Hz – 20 kHz
Crossover frequency: around 3.5 kHz
Sensitivity: approximately 103 dB SPL
Impedance: 8 Ω (also available in 4 Ω)
Enclosure: rear‑ported, eco‑friendly composite material
Dimensions: about 57.8 × 60 × 47 cm (22.8″ × 23.6″ × 18.5″)
Weight: ~35.5 lb (≈ 16.1 kg)
MBL100104 -
Markbass Little Mark Tube
The Little Mark Tube gives the warmth and richness of a tube preamp, or the clean attack of a solid state preamp… or a mix of both! On the front panel there are also two inputs with separate gain controls: one 1/4” jack, and one combo jack that accepts either a XLR or 1/4” cable. Additional features include switchable 48V phantom power for the XLR input, solid-state/tube mix control, four bands of equalization, VLE and VPF filters, line out level control, pre-post EQ switch for the XLR out (on rear panel), and mute control (push-pull on the master knob).
MBH110021Z -
Markbass Minimark 802 N 300
The Minimark 802 N300 Combo features the new NANO MARK II head, which offers a myriad of tone shaping options on the go with its complete and effective 4 band EQ controls. Plus, thanks to the included input jack insert (or an optional single footswitch) connected to the dedicated FSW input you can easily have fast access to a scooped-mid EQ setting to get a tight tone for slap or pick bass. And as highly requested, the head is REMOVABLE!
Not only can you use the head separately, you can use the combo's 2x8"cabinet standalone matched with a different head, or as an extension of another combo, or even together with another 8 ohm cabinet. The two 8"custom woofers and an onboard piezo tweeter give an incredible warm and focused sound - making this combo a brilliant choice for electric bass and also ideal for double bass as well as acoustic bass through its faithful reproduction of acoustic instruments!MBC105073 -
Markbass MB58R 104 Energy-4
Markbass MB58R 104 Energy-4 PRODUCT CODE: MBL100114YThe MB58R series is a further example of how Markbass is always one step ahead in innovating using state-of-the-art technologies. Once again Marco De Virgiliis with his pioneering soul has managed to create this new series of products which, with the use of custom components born thanks to years of experience and research Markbass and the use of revolutionary materials with an eye to the future and the evironment, has really nailed the tone and power versus portability issue.
The MB58R 104 ENERGY features 4x10"Markbass Neodymium custom speakers and 1"driver with horn, boasts an impressive 800W of power handling and weights 36.4 lbs / 16.5 kg . This cabinet works great on its own, plus the 8ohm version makes up an amazing stack when added to another Markbass 8 ohm cab (for example, another MB58R 104 ENERGY or a MB58R 151 ENERGY).markbass mb58r 104 energy-4 -
Markbass MB58R CMD 102 Pure
The MB58R series is a further example of how Markbass is always one step ahead in innovating using state-of-the-art technologies. Once again Marco De Virgiliis with his pioneering soul has managed to create this new series of products which, with the use of custom components born thanks to years of experience and research Markbass and the use of revolutionary materials with an eye to the future and the evironment, has really nailed the tone and power versus portability issue.
The MB58R CMD 102 PURE features 2x10"Markbass Neodymium custom speakers delivering lows that are tight
and fat with a pleasing earthy growl and clean, clear highs from the new hi-fi tweeter. Plus , this combo is ultraportable, it weighs only 30 lbs / 13.6 kg!MBC105087 -
MARKBASS MB58R CMD 151P- BASS AMP COMBO
MB58R CMD 151 P Product code: MBC105094 The MB58R series is a further example of how Markbass is always one step ahead in innovating using state-of-the-art technologies. Once again Marco De Virgiliis with his pioneering soul has managed to create this new series of products which, with the use of custom components born thanks to years of experience and research Markbass and the use of revolutionary materials with an eye to the future and the evironment, has really nailed the tone and power versus portability issue. The MB58R CMD 151 P features 1x15"Markbass classic ceramic speaker and a new piezo tweeter. The P series is created for those who like classic speakers but don’t want to carry heavy stuff, thanks to the revolutionary material used for the cabinet enclosure, the MB58R CMD 151Pweighs only 32.1 lbs / 14.6 kg! TECHNICAL FEATURES: SPEAKER 1×15” Markbass classic ceramic TWEETER new piezo tweeter SPEAKER POWER HANDLING 300W RMS (AES Standard) REFLEX Rear IMPEDANCE 8 ohms CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONCE 40Hz to 18KHz SENSITIVITY DB SPL 100dB CONTROLS GAIN | 4-BAND EQ | VLE – VPF FILTERS MASTER VOLUME | LINE OUT level control PRE/POST EQ e GND switches OUTPUT POWER 300W RMS @ 4 ohm, 150W RMS @ 8 ohm DIMENSIONS 17.72”/ 45cm (w); 22.68”/ 57.6cm (h); 18.54”/ 47.1cm (d) WEIGHT 32.1 lbs / 14.6 kgMARKBASS MB58R CMD 151P- BASS AMP COMBO -
MARKBASS MB58R CMD 102P- BASS COMBO
MB58R CMD 102 P Product code: MBC105092 The MB58R series is a further example of how Markbass is always one step ahead in innovating using state-of-the-art technologies. Once again Marco De Virgiliis with his pioneering soul has managed to create this new series of products which, with the use of custom components born thanks to years of experience and research Markbass and the use of revolutionary materials with an eye to the future and the evironment, has really nailed the tone and power versus portability issue. TheMB58R CMD 102 P features 2x10"Markbass classic ceramic speaker and a new piezo tweeter. The P series is created for those who like classic speakers but don’t want to carry heavy stuff, thanks to the revolutionary material and technology used for the cabinet enclosure, the MB58R CMD 102P weighs only 35.3 lbs /16 kg! TECHNICAL FEATURES SPEAKER 2×10” Markbass classic ceramic TWEETER New piezo tweeter SPEAKER POWER HANDLING 300W RMS (AES Standard) REFLEX Rear IMPEDANCE 8 ohms CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONCE 40Hz to 18KHz SENSITIVITY DB SPL 101dB CONTROLS GAIN | 4-BAND EQ | VLE – VPF FILTERS MASTER VOLUME | LINE OUT level control PRE/POST EQ e GND switches OUTPUT POWER 300W RMS @ 4 ohm, 150W RMS @ 8 ohm DIMENSIONS 17.72”/ 45cm (w); 22.68”/ 57.6cm (h); 18.64”/ 47.1cm (d) WEIGHT 35.3 lbs /16 kgMARKBASS MB58R CMD 102P- BASS COMBO -
Markbass MB58R CMD 151 Pure
The MB58R series is a further example of how Markbass is always one step ahead in innovating using state-of-the-
art technologies. Once again Marco De Virgiliis with his pioneering soul has managed to create this new series of products which, with the use of custom components born thanks to years of experience and research Markbass
and the use of revolutionary materials with an eye to the future and the evironment, has really nailed the tone and
power versus portability issue. The MB58R CMD 151 PURE combo sends out 300W of power through a single 15"Markbass Neodymium custom speaker and new hi-fi tweeter. Highly portable thanks to the cabinet material and technology (only 31.7 lbs / 14.4 kg) and astoundingly loud for its size, it’s the practical solution for those who like the sound of 15” speakers.MBC105089 -
MARKBASS MB58R CMD 121P-BASS AMP COMBO
MB58R CMD 121 P Product code: MBC105093 The MB58R series is a further example of how Markbass is always one step ahead in innovating using state-of-the-art technologies. Once again Marco De Virgiliis with his pioneering soul has managed to create this new series of products which, with the use of custom components born thanks to years of experience and research Markbass and the use of revolutionary materials with an eye to the future and the evironment, has really nailed the tone and power versus portability issue. TheMB58R CMD 121 P features 1x12"Markbass classic ceramic speaker and a new piezo tweeter. The P series is created for those who like classic speakers but don’t want to carry heavy stuff, thanks to the revolutionary material AND TECHNOLOGY used for the cabinet enclosure, the MB58R CMD 121P weighsonly 31.6 lbs / 14.3 kg! TECHNICAL FEATURES: SPEAKER 1×12” Markbass classic ceramic TWEETER new piezo tweeter SPEAKER POWER HANDLING 300W RMS (AES Standard) REFLEX Rear IMPEDANCE 8 ohms CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONCE 45Hz to 18KHz SENSITIVITY DB SPL 99dB CONTROLS GAIN | 4-BAND EQ | VLE – VPF FILTERS MASTER VOLUME | LINE OUT level control PRE/POST EQ e GND switches OUTPUT POWER 300W RMS @ 4 ohm, 150W RMS @ 8 ohm DIMENSIONS 17.72”/ 45cm (w); 22.68”/ 57.6cm (h); 18.64”/ 47.1cm (d) WEIGHT 31.6 lbs / 14.3 kgMARKBASS MB58R CMD 121P-BASS AMP COMBO -
MARKBASS NEW YORK 121-COMPACT CABINET
Product code: MBL100026Y New York 121 The Mini CMD 121P, has found its perfect companion! This is our lightest and most compact cabinet ever, and serves as a great extension cabinet for our combos: with this cab added, your combo turns into a 500W rig! This is also a small but mighty match for any of our 250-500W heads. SPECIFICATIONS: Power handling 400w Series New york Size S Speaker config 1x12" Impedance 8ohm Tweeter Piezo Tuned port Rear TECHNICAL FEATURES IMPEDANCE 8 ohms SPEAKER SIZE 1×12 in. BASS PORT rear TWEETER piezo POWER HANDLING 400W RMS (AES Standard) CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONSE 45 Hz to 18 kHz SENSITIVITY 100 dB SPL WEIGHT 29.98 lbs / 13.6 Kg WIDTH 14.96 in. / 38 cm HEIGHT 16.73 in. / 42.5 cm DEPTH 14.17 in. / 36 cmMARKBASS NEW YORK 121-COMPACT CABINET -
MARKBASS LITTLE MARK IV NINJA- BASS AMP HEAD
Product code: MBH110104Z LITTLE MARK IV NINJA > MPT - MARK PROPRIETARY TECHNOLOGY Many other bass amps on the market use power amps that are not specifically designed for bass. Markbass invested heavily in R&D to develop proprietary power amp technology in house. The MPT power amp was built from the ground up to respect and elevate the inherent tone of your instrument. TECHNICAL FEATURES:INPUTS INPUT impedance: 1 Mohm, max. voltage: 9 Vpp RETURN impedance: 22 Kohm, max. voltage: 10 Vpp CONTROLS GAIN –46 dB to +23 dB range LINE OUT level control on front panel PRE/POST EQ (for line out) switch on rear panel GROUND LIFT switch on rear panel MUTE SWITCH MASTER VOLUME EQUALIZATION LOW: center frequency 68 Hz; level: ±16 dB MID LOW: center frequency 360 Hz; level: ±16 dB MID HIGH: center frequency 800 Hz; level: ±16 dB HIGH: center frequency 10 kHz; level: ±16 dB OLD SCHOOL: max cut range: 250 Hz – 20 kHz 3 WAY ROTARY SWITCH: flat/scooped-mid/FSW OUTPUTS SEND EFFECTS: unbalanced, max. voltage 20 Vpp TUNER OUT: unbalanced, max. voltage 2 Vpp LINE OUT balanced XLR, max. voltage 20 Vpp SPEAKER OUT: speakon DIMENSIONS AND WEIGHT HEIGHT: 2 rack units (3.27 in. / 83 mm) WIDTH: 10.87 in. / 27.6 cm (19 in. / 48.3 cm with optional rack ears) DEPTH: 9.84 in. / 25 cm WEIGHT: 6.17 lbs / 2.8 kg OTHERS BI-BAND LIMITER FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MID OUTPUT POWER: 1000W RMS @ 4 ohm, 600W RMS @ 8 ohm POWER REQUIREMENT: 100V; 120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale)MARKBASS LITTLE MARK IV NINJA- BASS AMP HEAD -
MARKBASS CMD 102P IV-BASS COMBO AMPLIFIER
Product code: MBC105054Z CMD 102P IV This front-ported 2x10 combo is a great option for gigging bassists who want to cut through the mix without a big rig. TECHNICAL FEATURES: INPUTS INPUT impedance: 1 Mohm, max. voltage: 9 Vpp RETURN impedance: 22 Kohm, max. voltage: 10 Vpp CONTROLS GAIN –46 dB to +23 dB range LINE OUT level control on front panel PRE/POST EQ (for line out) switch on rear panel GROUND LIFT switch on rear panel MUTE SWITCH MASTER VOLUME EQUALIZATION LOW: center frequency 68 Hz; level: ±16 dB MID LOW: center frequency 360 Hz; level: ±16 dB MID HIGH: center frequency 800 Hz; level: ±16 dB HIGH: center frequency 10 kHz; level: ±16 dB OLD SCHOOL: max cut range: 250 Hz – 20 kHz 3 WAY SWITCH: flat/scooped-mid/FSW OUTPUTS SEND EFFECTS: unbalanced, max. voltage 20 Vpp TUNER OUT: unbalanced, max. voltage 2 Vpp LINE OUT balanced XLR, max. voltage 20 Vpp SPEAKER OUT: speakon/1/4” combo, 1/4”* OTHERS BI-BAND LIMITER FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MID OUTPUT POWER 500W RMS @ 4 ohm, 300W RMS @ 8 ohm POWER REQUIREMENT: 100V; 120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale) SPEAKER 2×10″ TWEETER piezo BASS PORT front IMPEDANCE 8 ohms SENSITIVITY 101 dB SPL SPEAKER POWER HANDLING 400W RMS (AES Standard) FREQUENCY RESPONSE 40 Hz to 18 kHz CROSSOVER FREQUENCY 3.5 kHz WEIGHT 37.7 lbs / 17.1 Kg WIDTH 23.03 in. / 58.5 cm HEIGHT 18.5 in. / 47 cm DEPTH 18.7 in. / 47.5 cmMARKBASS CMD 102P IV-BASS COMBO AMPLIFIER -
MARKBASS NANO MARK II- BASS HEAD AMP
Product code: MBH110101Z NANO MARK II TECHNICAL FEATURES INPUTS INPUT impedance: 1 Mohm, max. voltage: 15 Vpp RETURN impedance: 33 Kohm, max. voltage: 10 Vpp CONTROLS GAIN –60 dB to +23 dB range PRE/POST EQ (for line out) switch on rear panel GROUND LIFT switch on rear panel FOOTSWITCH (not included) for flat/scooped switch MASTER VOLUME EQUALIZATION LOW: center frequency 60 Hz; level: ±16 dB MID LOW: center frequency 360 Hz; level: ±16 dB MID HIGH: center frequency 800 Hz; level: ±16 dB HIGH: center frequency 5 kHz; level: ±16 dB OUTPUTS SEND EFFECTS: unbalanced, max. voltage 20 Vpp (Pre Eq) LINE OUT balanced XLR, Maximum Voltage 10 Vpp, Impedance 600 ohm SPEAKER OUT: speakon/1/4” combo DIMENSIONS AND WEIGHT WIDTH: 7.87 in. / 20 cm DEPTH: 8.27 in. / 21 cm HEIGHT: 2.09 in. / 5.3 cm WEIGHT: 3.20 lbs / 1.45 kg OUTPUT POWER 300W RMS @ 4 ohm, 150W RMS @ 8 ohm POWER REQUIREMENT 100/120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale) OTHERS BI-BAND LIMITER FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MIDMARKBASS NANO MARK II- BASS HEAD AMP -
MARKBASS- MB4GVNP35100LS (035 055 080 100) BASS STRING
Markbass Nickel Plated Steel / MB4GVNP35100LS (035 055 080 100) GROOVE Series – Electric bass nickel plated steel SPECIFICATIONS: Material Nickel plated steel Wound Round wound Markbass Strings are made in Abruzzo Italy, using the best selected innovative materials and ultimate quality controls.MARKBASS- MB4GVNP35100LS (035 055 080 100) BASS STRING -
MARKBASS-MB4GVNP45100LS (GROOVE- 045 065 080 100) BASS STRING
MARKBASS-MB4GVNP45100LS (GROOVE- 045 065 080 100) BASS STRING GROOVE Series – Electric bass nickel plated steel SPECIFICATIONS: Material Nickel plated steel Wound Round wound Markbass Strings are made in Abruzzo Italy, using the best selected innovative materials and ultimate quality controls.MARKBASS-MB4GVNP45100LS (GROOVE- 045 065 080 100) BASS STRING -
MARKBASS-MB4ENSS45100LS (ENERGY - 045 065 080 100) BASS STRING)
MARKBASS-MB4ENSS45100LS (ENERGY - 045 065 080 100) BASS STRING) The ENERGY series bass strings are made of high quality selected alloy steel wire, wound on hexagonal high carbon content core by the skilled hands of master string makers. Their calibrated diameter and tension offer amazing tone and feel. Very resistant to corrosion, they are the brightest strings and the best choice for bassists who are looking for rich harmonic, deep and fat tone. SPECIFICATIONS: Material Stainless steel Wound Round woundMARKBASS-MB4ENSS45100LS (ENERGY - 045 065 080 100) BASS STRING) -
MARKBASS-MB4GVNP40100LS (GROOVE - 040 060 080 100) BASS STRING
MARKBAS-MB4GVNP40100LS (GROOVE - 040 060 080 100) BASS STRING GROOVE Series – Electric bass nickel plated steel SPECIFICATIONS: Material Nickel plated steel Wound Round wound Markbass Strings are made in Abruzzo Italy, using the best selected innovative materials and ultimate quality controls.MARKBASS-MB4GVNP40100LS (GROOVE - 040 060 080 100) BASS STRING -
MARKBASS-MB4ENSS40100LS (ENERGY - 040 060 080 100) BASS STRING
MARKBASS-MB4ENSS40100LS (ENERGY - 040 060 080 100) BASS STRING The ENERGY series bass strings are made of high quality selected alloy steel wire, wound on hexagonal high carbon content core by the skilled hands of master string makers. Their calibrated diameter and tension offer amazing tone and feel. Very resistant to corrosion, they are the brightest strings and the best choice for bassists who are looking for rich harmonic, deep and fat tone. SPECIFICATIONS: Material Stainless steel Wound Round woundMARKBASS-MB4ENSS40100LS (ENERGY - 040 060 080 100) BASS STRING -
MARKBASS LITTLE MARCUS 58R-BASS AMP HEAD
LITTLE MARCUS 58R Product code: MBH110122Z The new LITTLE MARCUS 58R is ready to replicate the worldwide success of Marcus Miller signature. It features all the connections and controls on the front panel leaving on the rear panel only the speaker outs and AC power socket, offering optimal ergonomics and making everything more practical. TECHNICAL FEATURES: PREAMP Solid State POWER AMP MPT (MARK PROPRIETARY TECHNOLOGY) POWER 500W@4ohm / 300W@8ohm EQ1 ULTRALOW – LOW – MID/LOW – MID/HIGH – HIGH EQ2 MILLERIZER and OLD SCHOOL filters OTHER FEATURES XLR Line Out with Level Control and Pre/Post EQ and GND Lift switches BI-BAND LIMITER | MUTE switch FX Send/Return Footswitch (optional) to turn on/off EQ1 and Eq2 DIMENSIONS 10.87”/ 27.6 cm (w); 3.27”/ 8.3 cm (h); 10.08”/ 25.6 cm(d) WEIGHT 4.78 lbs / 2,17 kgMARKBASS LITTLE MARCUS 58R-BASS AMP HEAD -
MARKBASS MB58R MINI CMD 121 PURE- BASS AMP COMBO
MB58R MINI CMD 121 PURE Product code: MBC105086Z The MB58R MINI CMD 121 PURE features 1x12"Markbass Neodymium custom speaker and a new hi-fi tweeter. this combo continues to lead the pack when it comes to big sound from a small package. The sound that comes from this amp simply does not match what you see when you look at such a small and ultralight cube. TECHNICAL FEATURES: SPEAKER 1 x 12” Neodimium Custom TWEETER Markbass hi-fi tweeter SPEAKER POWER HANDLING 400W RMS (AES Standard) REFLEX Rear REAR 8 ohms CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONCE 45Hz to 20KHz SENSITIVITY DB SPL 99dB CONTROLS GAIN | 4-BAND EQ | OLD SCHOOL FILTER MUTE SWITCH | MASTER VOLUME LINE OUT level control | PRE/POST EQ e GND switches 3 WAY SWITCH: flat/scooped-mid/FSW OUTPUT POWER 500W RMS @ 4 ohm, 300W RMS @ 8 ohm OTHERS BI-BAND LIMITER | FSW (OPTIONAL) mute/scooped DIMENSIONS 15.35”/ 39cm (w); 18.50”/ 47 cm (h); 14.17”/ 36 cm (d) WEIGHT 21.7 lbs / 10.3kgMARKBASS MB58R MINI CMD 121 PURE- BASS AMP COMBO -
MARKBASS MB58R 104 ENERGY BASS CABINET
MB58R 104 ENERGY Product code: MBL100098Y The MB58R 104 ENERGY features 4x10"Markbass Neodymium custom speakers and 1"driver with horn, boasts an impressive 800W of power handling and weights 36.4 lbs / 16.5 kg . This cabinet works great on its own, plus the 8ohm version makes up an amazing stack when added to another Markbass 8 ohm cab (for example, another MB58R 104 ENERGY or a MB58R 151 ENERGY). TECHNICAL FEATURES: SPEAKER SIZE 4×10” Markbass Neodymium Custom TWEETER 1” driver w/custom horn CAB POWER HANDLING (AES STANDARD) 800W RMS CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONCE 35Hz to 20KHz SENSITIVITY DB SPL 103dB IMPEDANCE 8 or 4 ohms REFLEX Rear DIMENSIONS 22.76”/ 57.8cm (w); 23.62”/ 60 cm (h); 18.50”/ 47 cm (d) WEIGHT 36.4 lbs / 16.5 kgMARKBASS MB58R 104 ENERGY BASS CABINET -
MARKBASS MB INSTRUMENT PRE
MARKBASS MB INSTRUMENT PRE Product code: MBA120008Y > key points > ultra-compact size The MB INSTRUMENT PRE has a very compact size, allowing to easily fit into most instrument control cavities. > best sound reproduction This preamp provides always an amazing sound reproduction also with extreme settings, without losing your instrument tone details in the whole frequency range. > wide range of wiring/application It can be used in many configurations, for example: VOL/BLEND/3 band EQ VOL/VOL/3 band EQ VOL/ BLEND/TONE (active/passive)/3 band EQ and many others. > 9V or 18V, low power consumption The MB INSTRUMENT PREAMP works either at 9V or 18V (one or two 9V battery) and it has a very low consumption (about 700 uA with 9V supply) offering an exceptionally long battery life. TECHNICAL FEATURES INPUT Impedance 1.1 Mohm EQ CONTROLS LOW / MID / HIGH POWER SUPPLY 9V or 18V (2x9V) POWER CONSUMPTION about 700 uA (with 9V supply)MARKBASS MB INSTRUMENT PRE -
MARKBASS MARCUS MILLER CMD 101 MICRO 60 BASS COMBO AMP
MARCUS MILLER CMD 101 MICRO 60 Product code: MBC105036Z This compact combo amp section also features gain and master controls, 3- band EQ, aux in, headphone out, speaker on/off switch. TECHNICAL FEATURES: PREAMP Solid State AMP OUTPUT POWER (MPT) 60W @ 4 ohm / 45W @ 8 ohm CONTROLS Gain – Master EQ (±16DB) LOW (40 HZ) | MID (800HZ) | HIGH (6 KHZ) SPEAKER 1 x 10″ Markbass Custom TWEETER Piezo SPEAKER POWER HANDLING (AES STANDARD) 200W RMS REFLEX Rear IMPEDANCE 8 ohms CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONCE 45Hz to 18KHz OTHER FEATURES Aux IN – Headphone OUT XLR Line Out – Speaker ON/OFF Output for external cab (minimum load 8Ω) Dual Voltage Switch 120V/240V* *(not available on the 100V version manufactured for Japan) DIMENSIONS 14.56”/ 37cm | 13.14”/ 33,4cm | 14.40”/ 36,6cm WEIGHT 25.6lbsMARKBASS MARCUS MILLER CMD 101 MICRO 60 BASS COMBO AMP -
MARKBASS CMB 101 BLACK LINE- COMBO AMP
CMB 101 Black Line Product code: MBC105104Z The CMB101 Black Line is an amazing entry level 40W combo, the perfect choice for those who want to start with the right sound. It's compact, light, portable and the sound it delivers is superior to any other practice amp at this price thanks to Markbass tone and quality. It features a headphone output, and an aux input for connecting your favourite media players to mix with your bass sound, letting you practice anywhere, anytime. TECHNICAL FEATURES: SPEAKER 1×10” EQ 4-band CONTROLS GAIN | MASTER VOLUME SCOOPED and BOOST switches OTHERS AUX IN HEADPHONE OUT PREAMP OUT OUTPUT POWER 40W DIMENSIONS 14.76”/ 37.5cm (w); 14.37”/ 36.5 cm (h); 10.63”/ 27 cm (d) WEIGHT 21.38 lbs / 9.7 kgMARKBASS CMB 101 BLACK LINE- COMBO AMP -
MARKBASS MB4ENSS45105LS (ENERGY 045-065-085-105) BASS STRING
MARKBASS MB4ENSS45105LS (ENERGY 045-065-085-105) BASS STRING PRODUCT CODE: MB4ENSS45105LS The ENERGY series bass strings are made of high quality selected alloy steel wire, wound on hexagonal high carbon content core by the skilled hands of master string makers. Their calibrated diameter and tension offer amazing tone and feel. Very resistant to corrosion, they are the brightest strings and the best choice for bassists who are looking for rich harmonic, deep and fat tone. SPECIFICATIONS: Material Stainless steel Wound Round woundMARKBASS MB4ENSS45105LS (ENERGY 045-065-085-105) BASS STRING -
MARKBASS LITTLE MARK VINTAGE 1000-BASS AMP HEAD
Little Mark Vintage 1000 Product code: MBH110093Z This 1000W high-power head is created for those who need the highly appreciated features and lot of tone options of the LITTLE MARK VINTAGE but also like to have a massive supply of power, no matter how big is the stage and the volume you play! TECHNICAL FEATURES: INPUTS INPUT: impedance 500 Kohm, max. voltage 9 Vpp EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp CONTROLS GAIN: -46 dB to +23 dB range MASTER VOLUME DI LEVEL LIMITER (from 0 to MAX) GROUND LIFT (switch on rear panel) PRE/POST EQ (switch on rear panel) 3-WAY SWITCH (FLAT/CUT/OLD) EQUALIZATION LOW: center frequency: 68 Hz; level: ±16 dB LOW MID: center frequency: 400 Hz, level: ±16 dB HIGH MID: center frequency: 2200 Hz, level: ±16 dB HIGH: center frequency: 10 KHz, level: ±16 dB OUTPUTS LINE OUT / DI: balanced XLR, 600 Ohm transformer output – Maximum Voltage 12 Vpp EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ) TUNER OUT: unbalanced, max. voltage 2 Vpp SPEAKER OUT: speakon comboMARKBASS LITTLE MARK VINTAGE 1000-BASS AMP HEAD -
MARKBASS MB GV 4 GLOXY VAL CREAM CR MP BASS GUITAR
Product code: MBB148009C MB GV 4 Gloxy Val Cream CR MP SPECIFICATIONS: Strings 4 strings Electronic Passive /active Series Gloxy series TECHNICAL FEATURES HEADSTOCK Mark Double Shape Matching NECK Hard Maple | Comfort C Profile FINGERBOARD Maple | Block Inlays | Binding | 20-Fret | 34″ scale | Nut 36mm BODY P Style | Basswood | Bolt O STRING SPACING 19mm PICKUP / ELECTRONIC Markbass JJ style MB Instrument PRE | 9V Active -Passive COLOR Cream KNOBS Black > MB BASS BAG UNIVERSAL GIG BAG INCLUDEDMARKBASS MB GV 4 GLOXY VAL CREAM CR MP BASS GUITAR -
MARKBASS MB GV 4 GLOXY VAL SURF GREEN CR MP BASS GUITAR
Product code: MBB148002C MB GV 4 Gloxy Val Surf Green CR MP SPECIFICATIONS: Strings 4 strings Electronic Passive /active Series Gloxy series TECHNICAL FEATURES: HEADSTOCK Mark Double Shape Matching NECK Hard Maple | Comfort C Profile FINGERBOARD Maple | Block Inlays | Binding | 20-Fret | 34″ scale | Nut 36mm BODY P Style | Basswood | Bolt On STRING SPACING: 19mm PICKUP / ELECTRONIC Markbass JJ style MB Instrument PRE | 9V Active -Passive COLOR Surf Green KNOBS BlackMARKBASS MB GV 4 GLOXY VAL SURF GREEN CR MP BASS GUITAR -
MARKBASS MB GV 4 GLOXY VAL BLACK CR MP BASS GUITAR
Product code: MBB148001C SPECIFICATIONS: Strings 4 strings Electronic Passive /active Series Gloxy series TECHNICAL FEATURES HEADSTOCK Mark Double Shape Matching NECK Hard Maple | Comfort C Profile FINGERBOARD Maple | Block Inlays | Binding | 20-Fret | 34″ scale | Nut 36mm BODY P Style | Basswood | Bolt O STRING SPACING 19mm PICKUP / ELECTRONIC Markbass JJ style MB Instrument PRE | 9V Active -Passive COLOR BlackMARKBASS MB GV 4 GLOXY VAL BLACK CR MP BASS GUITAR -
MB58R 122 ENERGY
Powerful Tone. Exceptional Portability. Eco-Friendly Design.
The Markbass MB58R 122 ENERGY is a high-performance bass cabinet that combines robust sound output with a lightweight, environmentally conscious design. Equipped with two 12" neodymium custom speakers and a 1" driver with a horn, this cabinet delivers 800W RMS of rich, full-range tone suitable for various musical applications. Its innovative construction ensures durability while keeping the weight at just 17.5 kg, making it an ideal choice for gigging musicians.
Key Features:
Speaker Configuration: 2×12" Markbass Neodymium Custom
Tweeter: 1" Driver with Horn
Power Handling: 800W RMS (AES Standard)
Frequency Response: 45 Hz – 20 kHz
Crossover Frequency: 3.5 kHz
Sensitivity: 103 dB SPL
Impedance Options: 4 or 8 Ohms
Reflex: Rear
Dimensions: 57.8 cm (W) × 60 cm (H) × 47 cm (D)
Weight: 17.5 kg
Construction: Eco-friendly, lightweight materials
Origin: Made in Italy
MB58R 122 ENERGY -
Little Mark Vintage 1000
Vintage Warmth Meets Modern Power in a Compact Design
The Markbass Little Mark Vintage 1000 is a high-powered bass amplifier head that combines classic tube warmth with cutting-edge technology. Part of Markbass's esteemed Gold Line series, this amp delivers 1000W of pure, dynamic tone in a lightweight and portable chassis. Whether you're performing on large stages or in intimate venues, the Little Mark Vintage 1000 ensures your bass sound remains rich, clear, and impactful.
Key Features:
Tube Preamp: Equipped with an ECC83 (12AX7) tube, providing a warm and harmonically rich tone.
1000W MPT Power Amp: Mark Proprietary Technology ensures ample headroom and dynamic response, delivering 1000W at 4 ohms and 600W at 8 ohms.
4-Band EQ: Precisely tuned frequencies—Low (68 Hz), Low Mid (400 Hz), High Mid (2200 Hz), High (10 kHz)—each adjustable by ±16 dB for versatile tone shaping.
3-Way EQ Preset Switch:
FLAT: Neutral EQ setting.
CUT: Scooped mids with enhanced lows and highs.
OLD: Vintage-style tone with reduced highs.
Limiter Control: Adjustable from 0 to MAX, allowing for modern compression or vintage-style distortion.
Balanced DI Output: Transformer-balanced XLR out with Pre/Post EQ and Ground Lift switches, providing a clean and pure signal for recording or live sound.
Footswitch Compatibility: Optional dual footswitch enables Mute and EQ ON/OFF functions for seamless control during performances.
Gold Line Components: Features gold-plated circuits and top-quality selected components for superior sound purity and reliability.
MBH110112Z -
LITTLE AG 1000
Massive power and Ultimate portability.
This 1000W signature bass head features a powerful solid-state preamp with Markbass’s custom MPT power amp technology. Its tailored EQ section and clear tone make it ideal for any style—from gospel to funk to fusion. Whether on stage or in the studio, the Little AG 1000 keeps your sound fat, clean, and expressive.
Key Features:
Power Output: 1000W @ 4 ohms / 600W @ 8 ohms
Custom EQ: 5-band EQ designed with Andrew Gouché for ultimate tonal control
Preamp: Solid state
Limiter: Bi-band for smooth dynamics
Mute & EQ Footswitch Option: For live flexibility
Balanced XLR Line Out: With Pre/Post EQ and Ground Lift
Weight: Just 3.2 kg – perfect for gigging bassists
Dimensions: 27.6 x 25 x 8.3 cm
LITTLE AG 1000 -
MB GV 5 Gloxy 3-Tone Sunburst CR MP
The MB GV 5 Gloxy 3-Tone Sunburst delivers vintage looks, modern electronics, and smooth playability in a 5-string format. With its classic 3-tone sunburst finish, chrome hardware, and maple fingerboard, it’s built to impress both in sound and appearance.
Featuring Markbass JJ-style pickups and a powerful 3-band EQ with an active/passive switch, this bass offers deep lows, punchy mids, and sparkling highs—perfect for any playing style or genre.
Key Features:
5-string electric bass in 3-tone Sunburst finish
Solid-body (alder or basswood) with maple fingerboard
“Comfort C” maple neck with block inlays
Markbass JJ-style single-coil pickups
MB Instrument Pre with 3-band EQ (active/passive)
Vintage-style bridge & chrome hardware
Lightweight design with a smooth feel
Includes deluxe Markbass gig bag
MBB148018C -
MB GV 5 Gloxy Fiesta Red CR MP
The MB GV 5 Gloxy Fiesta Red is a 5-string electric bass that combines a classic look with modern playability. Featuring a bold Fiesta Red gloss finish, this bass is built for serious performance with its solid tonewood body, maple fingerboard, and smooth “Comfort C” maple neck.
Equipped with Markbass custom JJ-style pickups and a powerful active/passive 3-band EQ, it delivers a wide range of rich, punchy tones perfect for any genre. Whether on stage or in the studio, the MB GV 5 Gloxy offers excellent feel, tone, and style.
Key Features:
5-string electric bass with classic design
Solid body (basswood or alder) with gloss Fiesta Red finish
Maple neck and fingerboard with block inlays
Markbass JJ-style pickups with 3-band EQ (active/passive)
Vintage-style bridge and chrome hardware
Lightweight and comfortable for long playing sessions
Includes deluxe Markbass gig bag
MBB148019C
