The DJ quality PLX-1000 direct drive analog turntable is designed for DJs who enjoy the look, feel, and performance of vinyl for music playback.

Delivering breath-taking scope for creativity, the DJM-750 takes FX manipulation and software synergy to new levels.

The DJM-2000NXS combines advanced performance features and an intuitive layout to empower unbridled creativity in the booth.

The DJM-350 is the perfect entry-level mixer, boasting features from our top-flight mixers – including powerful creative effects, USB recording and a MIC input with a 2-band EQ – without the top-flight price.

With the DJM-250, you can combine EQ effects with 2 filters to perform mixes that sound like they were meant to be. Add that to the DJM-250’s pro-DJ features and you’ve got a mixer like no other.

DJs can synchronize audio and video with up to four sources simultaneously.

The CDJ-2000NXS2 inherits all the best features from its predecessor – the CDJ-2000NXS – and takes a giant leap forward.

The entry-level CDJ-350 inherits many traits from our pro-DJ decks, making it a perfect springboard to professional sounding sets.

The DDJ-WeGO3 gives you unlimited musical choice. Connect it to an iOS device running Algoriddim’s djay 2 app to use the console’s jog wheels, buttons and dials to perform with your Spotify or iTunes library.

The DDJ-WeGO3 gives you unlimited musical choice.

The Pioneer DJ DDJ-RZ controller and mixer expands on the already impressive capabilities of Pioneer's DDJ-RX

Hitting the decks has never been easier and more intuitive - even for first-time DJs. Not only does it boast all popular features from the DDJ-SB – such as Filter Fade and Performance Pads – but it now boasts features not usually found at this price point, including trim pots, level meters, the Pad Trans beat effect and 4-deck control.

Add the DDJ-SP1 to a set-up that supports mixing and scratching with Serato DJ – for example a laptop, or timecode CDJs/turntables with a DJM-900SRT mixer – and use the pre-mapped buttons and dials to trigger 6 samples, 8 Hot Cues and more than 30 FX Powered by iZotope - without the need to touch a keyboard or mouse.

The DDJ-SR delivers many of the superior performance features of the top-flight 4-channel DDJ-SX2, including a built-in Serato sound card, large jog wheels and Slip Mode.

The DDJ-WeGO3 gives you unlimited musical choice.

Technical Specifications Acoustic Performance Configuration Active vented design Frequency Range (-3 dB) 30 Hz to 150 Hz Maximum Output 129 dB SPL Transducer LF Driver 18” (3” voice coil) Amplifier Amplifier Type Class D Total System Power 1,200W dynamic (600W continuous) Connections and Controls Inputs 2 x XLR/TRS line combo Outputs 1 x XLR Link Out DSP DSP Features LCD screen with EQ and multiple presets Enclosure Cabinet 15 mm plywood Grille 1.5 mm steel Handles 2 side Mounting Ground-stack provisions Dimensions (H x W x D) 26"x 19.3"x 25.8"(662 mm x 490 mm x 656 mm) Weight 83.8 lbs (38 kg) Power Power Input 115V / 230V ~50/60 switchable Maximum Current 5.3A (230V-50 Hz), 10.6A (120V)

Features 10-inch glass-composite low-frequency transducer 250 watt, Class AB biamplification Input gain control (-30 dB to +6 dB, continuously variable) and continuously variable lowpass filter (50 Hz to 130 Hz) Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent to the main monitors Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out Left and right, balanced XLR and ¼"TRS and unbalanced RCA main inputs

Expandable when you need more I/O. The Studio 192 Mobile audio interace has 18 digital inputs and outputs, allowing you to add more analog I/O when you need it. The DigiMax DP88 preamp/converter was designed to seamlessly extend the analog I/O on the Studio 192 Mobile with eight digitally controlled XMAX preamps, ADAT I/O support up to 96 kHz, direct analog inputs, DAC outputs, and word clock I/O. Its mic preamps are fully remote-controllable from UC Surface, Studio One, and Studio One Remote when connected via ADAT Lightpipe to the Studio 192 Mobile so that they naturally extend your analog inputs both sonically and functionally. General Features 22x26, 24-bit, 192 kHz audio interface and studio command center Input monitoring with StudioLive® Fat Channel DSP processing on every analog input and the first ADAT inputs Integrated zero-latency monitoring Speaker switching and talkback Integrated Software Total integration with included Studio One® Artist DAW software (Mac®/Windows®) for multitrack music production, monitor mixing with effects, and studio command features Wireless control over preamp levels from free UC Surface touch-control software for iPad® and Android™ tablet and from free Studio One Remote for iPad and Android tablet Wired control over preamp levels from free UC Surface touch-control software for Mac and Windows computers Compatible with most recording software for Mac and Windows Studio Magic Plug-in Suite included Flexible Connectivity Simultaneous I/O up to 22 inputs/26 outputs (8x14 at 192 kHz) Individual stereo main balanced outputs with mono, dim, mute, output metering and level control accessible from front-panel and UC Surface 2 front-panel combo microphone/instrument inputs with XMAX remote-controllable mic preamps Individually switched 48V phantom power 2 rear-panel balanced, ¼” line level, direct-to-ADC inputs 4 balanced ¼” TRS outputs for monitor mixing and speaker switching ADAT Optical/Dual SMUX inputs/outputs: 16x16 channels at 44.1 or 48 kHz; 8x8 channels at 88.2 or 96 kHz Stereo S/PDIF coaxial input and output 1 high-volume headphone output with dedicated DAC BNC word clock input and output with low-jitter clocking Digitalia USB 3.0 audio interface USB 2.0 compatible 24-bit resolution and up to 192 kHz sampling rate Top-quality 118 dB A/D/A converters Physical Road-rugged construction with all-metal chassis and metal knobs 12 VDC external power supply (included)

Features Main Components 1,200W (dynamic) Class D power amp 15-inch woofer with a 3-inch voice coil Frequency response: 35 to 160 Hz Max SPL: 126 dB 2 combo XLR-¼-inch line inputs and two XLR direct outputs Controls Easy-to-use DSP performance presets: Normal — typical FOH use Mo’ Bass — extended low-end performance Locate—adjusts performance for arrayed and non-arrayed applications Normal — non-arrayed applications Cardioid — create a ground-stacked cardioid subwoofer array (using two of the same model subwoofer) Endfire — create an endfire cardioid subwoofer array (using two of the same model subwoofer) Fully variable lowpass filter (sets the upper frequency limit/crossover point) LP filter presets for use with AIR15, AIR12, and AIR10 LP filter presets for use with AIR15, AIR12, and AIR10 Alignment delay — adds delay time relative to full-range speaker Polarity — invert the polarity of the summed input signal Convenience Features 2 comfortable ergonomic side handles Ground-stack provisions Caster provisions (caster kit included) Defeatable front-panel LED Rugged, texture-painted, birch enclosure Tour-grade, 17 gauge steel grille

Electronics Voltage 100-120V Wattage LF Amplifier - 80W, HF Amplifier - 65W Hardware Cabinet Material Vinyl-Laminated, Medium-Density Fiberboard Miscellaneous Connection Type IEC Monitors Protections RF Interference Output-Current Limiting Over-Temperature Turn-On/Off Transient Subsonic Filter External Mains Fuse Audio Controls Volume Range: A-Type TaperMF Control: Variable (-6 to +6 dB)HF Control: Variable (-6 to +6 dB)Low Cut: Flat, 80 Hz, 100 HzAcoustic Space: Flat, -2 dB, -4 dB Peak SPL 106 dB (at 1 Meter) Crossover Frequency 2.4 kHz Monitor Inputs 1 x Balanced XLR, 1 x Balanced 1/4"TRS, 1 x Unbalanced RCA HF Transducers 1.25” Silk Dome Tweeter LF Transducers Dual 6.5" Frequency Response 45 Hz – 22 kHz Input Impedance 10 kΩ Monitor Amplifier Power LF Amplifier - 80W, HF Amplifier - 65W Specifications Input Impedance 10 kΩ

The R65's custom 6.8-inch Air Motion Transformer (AMT) ribbon tweeter responds to the subtlest waveforms and the highest frequencies, resulting in a greater sense of"air"and"space"that is characteristic of audiophile recordings. Custom coated, woven, 6.5-inch LF drivers produce a more dynamic output than conventional designs, thanks to the rigid cone's ability to maintain a more constant dispersion pattern across its frequency response range. The result is transparent sound with narrow vertical dispersion, which reduces undesirable reflections, and broad horizontal dispersion for a wide sweet spot. Driven by a 150W Class D amplifier, the biamped R65 delivers an open, clear, and less fatiguing listening experience. Features 2-way active AMT design provides articulate high-frequency response and wide stereo imaging Custom-designed, 6.8-inch, AMT ribbon tweeter responds to the subtlest waveforms and the highest frequencies 6.5-inch Kevlar LF drivers provide transparent mid- and low-frequency reproduction for clean sound and punchy bass Biamped 150W RMS (LF = 100W, HF = 50W), Class D power amplifier with switching power supply Acoustic Space settings (Linear, -1.5 dB, -3 dB, -6 dB) compensate for room placement Balanced XLR and ¼-inch TRS plus unbalanced RCA inputs provide flexibility for seamless integration into any environment RF interference, output current limiting, over temperature, turn-on/off transient, and subsonic filter protection Interchangeable black faceplate included Energy Conservation Mode (with enable/disable) lowers standby power to <0.5W External mains fuse Power: 100-120V, 60 Hz or 220-240V, 50 Hz

BAG130PN Soft Electric bass bag, highly resistant and highly practical. The bag is made with a soft, rip-proof 420D Nylon. Featuring comfortable handles, resistant adjustable shoulder straps secured with metal rings and wide pockets for music books and accessories. SPECIFICATION: Soft bag for Electric basses Construction materials: Rip-proof padded Nylon 420D with cloth outer edge-banding. Padding: Not available Colours Available: Black Handles: Strengthened Velcro strap handle - Adjustable straps with metal ring. Accessories: Two wide front pockets for Music book and accessories. Resistant zips with die cast pull tags

BAG140PN Soft 3/4 Classic guitar bag, highly resistant and highly practical. The bag is made with a soft, rip-proof 420D Nylon. Featuring comfortable handles, resistant adjustable shoulder straps secured with metal rings and wide pockets for music books and accessories. SPECIFICATIONS: Soft Bag for 3/4 Classic guitars Construction materials: Rip-proof padded Nylon 420D with cloth outer edge-banding. Padding: Not available Colours Available: Black Handles: Strengthened Velcro strap handle - Adjustable straps with metal ring. Accessories: Two wide front pockets for Music book and accessories. Resistant zips with die cast pull tags

BAG905PN Heavy duty rip-proof nylon 420D keyboard bag. Inner dimensions: 950 (width) x 380 (depth) x 150 (height) mm. 20mm soft foam padding. Available in black. Constructed from soft 420D tear proof Nylon with cloth outer borders, the "900" series bags feature resistant 20mm high density foam padding and a soft foam inner padding, with reinforced and Velcro equipped straps that allow to hold the keyboard. The handles are padded for maximum comfort, can be closed with Velcro. The padded shoulder straps are adjustable and secured to the bag with sturdy metal rings. Wide pockets are positioned on the front of the bag for music books and accessories and the resistant zips feature die cast pull tags.

RANDON AC-MINI Randon guitars use the natural texture of native wood to show the nature of each piece of wood. The guitar uses the natural texture and lines of native wood. SPECIFICATIONS: Specifications: Top mahogany Back / Sides mahogany Neck Mahogany Fingerboard rosewood Body Style OM Cutaway No Colour Natural Finish matte Saddle width 1.69″ – 43.0mm Scale length 25.59″ – 649.98mm WEIGHT: 2.7 KGS.

R1-MINI Randon guitars use the natural texture of native wood to show the nature of each piece of wood. The guitar uses the natural texture and lines of native wood. SPECIFICATIONS: 38'' OM BUCKET TRAVEL GUITAR SPRUCE TOP MAHOGANY SIDES AND BACK ROSEWOOD FRETBOARD ADVANCED HYDRAULIC TUNERS

R2-A Randon guitars use the natural texture of native wood to show the nature of each piece of wood. The guitar uses the natural texture and lines of native wood. SPECIFICATIONS: TRAVEL GUITAR SPRUCE TOP MAHOGANY SIDES AND BACK ROSEWOOD FRETBOARD WEIGHT: 2.3 KGS

R1-AC Randon guitars use the natural texture of native wood to show the nature of each piece of wood. The guitar uses the natural texture and lines of native wood. SPECIFICATIONS: 40-inch GA barrel equipped with DOUBLE sound hole resonance pickup. Randon R1-AC 40-inch spruce top/mahogany sides and back‧ Cutaway acoustic guitar Clear and solid, warm and with smooth low frequency. Fingerboard rosewood/neck mahogany. WEIGHT: 2.3 KG

R2-MINI Randon guitars use the natural texture of native wood to show the nature of each piece of wood. The guitar uses the natural texture and lines of native wood. SPECIFICATIONS: 38'' OM BUCKET TRAVEL GUITAR SPRUCE TOP MAHOGANY SIDES AND BACK ROSEWOOD FRETBOARD ADVANCED HYDRAULIC TUNERS

The instruments of the modern manufacturer Randon not only have a variety of attractive optical features, but are also technically very robust and sophisticated. Randon combines unique woods such as acacia and mango with classic tonewoods such as cedar, spruce and mahogany. In any case you will explore a completely new sound spectrum with a Randon guitar!

Randon RGI 01CE electric acoustic guitar. Randon RGI 01CE The Randon production team has more than 40 years of experience in making guitars.

Individual sounds are legible and the guitar sounds dynamically in a wide band. Solid top plate and vintage finish make the RGI-10VT CE model outclass a large.

ART 912-A PROFESSIONAL ACTIVE SPEAKER RFC ART 912-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. PRODUCT FEATURES: Up to 130 dB Sound Pressure Level 2100W Class-D Bi-Amplification 50-20000 Hz linear frequency response 1.75" Compression Driver 12" Woofer FiRPHASE zero degrees phase technology Bass Motion Control woofer excursion management

RCF F 10XR- 10-channel mixing console with multi-FX & Recording RCF’s next generation F Series mixers builds on the rich analog legacy found in the professional E Series, featuring high quality sound in five formats from 6 to 24 channels. A powerful tool for the musician and the sound enthusiast. PRODUCT FEATURES: Sturdy Metal Chassis PRO DSP FX onboard with 16 presets Stereo Recording and Playback via USB port Balanced main output audio path from input to output 2 single control compressors Mono channels provided with 3-band EQ. 2-band EQ on stereo channels. Robust, compact and attractive design. Designed and Engineered in Italy External Universal Power Supply