This website uses cookies to ensure you get the best experience on our website. Read more
Neumann USM 69 i Variable Pattern Stereo Microphone - Nickel
The USM 69 i condenser stereo microphone is a studio microphone for intensity stereo recording. It is suitable for XY and MS recordings.
The USM 69 i stereo microphone has two separate dual-diaphragm capsules. These are mounted vertically and rotate against each other. The directional polar patterns can be selected separately for each capsule. The capsules operate independently from each other.
Features
Switchable stereo microphones |
Two pressure-gradient transducers with double membrane capsules |
MS- or XY-stereophony |
Capsules rotary by 270° |
Very low noise |
Aperture and pick-up angles freely choosable |
Directional characteristics reproducably switchable, omni, wide angle cardioid, cardioid, hypercardioid, figure-8 |
Product Specs
Acoustical operating principle | Pressure gradient transducer |
Direct ional pattern | Omnidirectional, wide-angle cardioid, cardioid, hypercardioid, figure-8 |
Frequency range | 20 Hz ... 20 kHz |
Sensitivity at 1 kHz into 1 kohm | 13 mV/Pa |
Rated impedance | 150 ohms |
Rated load impedance | 1 kohms |
Equivalent noise level, CCIR1) | 24 dB |
Equivalent noise level, A-weighted1) | 13 dB-A |
Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL) | 70 dB |
Signal-to-noise ratio, A-weighted1)(rel. 94 dB SPL) | 81 dB |
Maximum SPL for THD 0.5%2) | 132 dB |
Maximum output voltage | 3 dBu |
Supply voltage (P48, IEC 61938) | 48 V ± 4 V |
Current consumption (P48, IEC 61938) | 2 x 0.7 mA |
Matching connector | XLR5F |
Weight | 510 g |
Diameter | 30 + 48 mm |
Length | 293 mm |
Write Your Own Review