This website uses cookies to ensure you get the best experience on our website. Read more
Adam ARTist 6
The ARTist 6, offering a clear compression free and high definition sound in your own home, was designed to function both as a front loud speaker as part of a mulit-channel system or as part of a classical stereo setup.
The visual elegant floorstanding ARTist 6 with its black glossy or white glossy finish is a feast for the eyes in every living room. Whether as a stereo system or as part of a 5.1 setup, the ARTist 6 is a symbolization of a clear and high-defined sound within your own four walls.
The new X-ART tweeter, a milestone in electroacoustic transducers, developed by ADAM Audio, is probably the most efficient tweeter in the world. While the new X-ART tweeter, driven by a specially designed A/B amplifier, makes even the most subtle details of the high range frequencies audible, the low range shows impressive power accompanied by outstanding accuracy. The sound capacity of the low ranges is far beyond what one would expect from a speaker this size.
The power switch as the adjustment controls for treble level and two shelving filters for high and low frequencies can be found on the back of the speaker. Unlike the tweeter control, which raises or lowers the entire level, the two shelving filters change the level of the low and mid frequencies progressively. These filters are especially good for fine-tuning the sound to fit the spatial conditions.
Product Spec
| Mid-Woofer | |
| Number | 2 |
| Basket Ø | 4.5" (120 mm) |
| Voice coil Ø | 1" (25 mm) |
| Cone material | Carbon Fiber |
| Tweeter | |
| Number | 1 |
| Type | X-ART |
| Diaphragm area | 4 inch² (2420 mm²) |
| Equiv. Diaphragm Ø | 2" (56 mm) |
| Velocity transform ratio | 4:1 |
| Diaphragm weight | 0.17 g |
| Built-in Amplifiers | |
| Mid-Woofer | 2 |
| Type | A/B |
| Amp. power RMS / music | 35 W / 50 W |
| Tweeter | 1 |
| Type | A/B |
| Amp. power RMS / music | 35 W / 50 W |
| Control panel | |
| Input Sensitivity | -∞ to +14 dB |
| High Shelf EQ > 5 kHz | ±6 dB |
| Low Shelf EQ < 300 Hz | ±6 dB |
| Tweeter gain | ±4 dB |
| Input connectors | |
| Analog | XLR / RCA |
| General data | |
| Frequency response | 48 Hz - 50 kHz |
| THD 90dB/1m > 100 Hz | ≤0.6 % |
| Max SPL with sine wave acoustic 100Hz to 3kHz at 1m | ≥103 dB |
| Max SPL per pair at 1m | ≥111 dB |
| Input impedance | 10 KOhm |
| Weight | 20.3 lb (9,2 kg) |
| Magnetically shielded | No |
| Height x Width x Depth | 33.5" (850 mm) x 5.5" (135 mm) x 7.5" (185 mm) |
| Finish | Black glossy, White glossy |
Write Your Own Review
