Skip to the beginning of the images gallery

Rupert Neve Designs Portico 5012V Duo Mic Preamplifier (Vertical)

In stock

SKU

Portico 5012V

AED 6,340.00

The vertical Rupert Neve Designs 5012 Duo Mic Preamplifier is a dual-channel microphone pre-amplifier built with Rupert Neve's custom input and output transformer circuits.

Wishlist Compare

Details

The vertical Rupert Neve Designs 5012 Duo Mic Preamplifier is a dual-channel microphone pre-amplifier built with Rupert Neve's custom input and output transformer circuits. The pre-amplifier is electronically balanced and designed to minimize the effects of hum, radio interference, and other dissonant noise from altering your sound. The vertical version of this module is a half-rack unit intended to be mounted in a small vertical rack or a bracket or tray that is itself mounted in a conventional 19" horizontal rack.

The microphone inputs use a transformer-like-amplifier chip and a toroidal Common Mode Rejection low-pass filter to reject frequencies above 150,000 Hz. This prevents odd high-frequency harmonics from altering the sound quality of your recording signal chain. After the high-frequency rejection stage, the pre-amp uses an input transformer that provides +25 dBu of input signal at unity gain without the need for a pad. The combination of an electronically balanced circuit with a true transformer amplifier stage allows the device to retain the Rupert Neve's sound in a small form factor.

Product Highlights

Dual-Channel Microphone Preamplifier
Silk Circuit
Continuously Sweepable High-Pass Filter
Connect to Multiple Buss Modules
Mute Button
Phantom Power
Phase Button

Product Specs

Connectors	2 x balanced XLR microphone connectors 2 x balanced XLR connectors 4 x 1/4" TRS bussing module connectors
Frequency Response	Main Output, no load -0.2 dB at 10 Hz -3 dB at 160,000 Hz Buss output measured at the 5014 monitor Buss-Mix Amplifier Output -0.2 dB at 10 Hz -3 dB at 160,000 Hz
Noise	Measured at Main Output, unweighted, 22 to 22,000 Hz Terminated 150Ω With gain at unity: better than -100 dBu With gain at 66 dB: better than -62 dBu Equivalent Input Noise: better than -128 dBu Noise Factor: 1.5 dB
High-Pass Filter	Continuously variable swept frequency from 20 to 250 Hz Slope: 12 dB/octave
Gain	Unity to 66 dB in 6 dB steps Trim continuously adjustable from -6 to 6 dB
Buss I/O	Output is designed to feed the 5014 Monitor Buss mix amplifier at the internal system level of -2.5 dBu Output level of the 5014 is equal to that of the 5012
Maximum Output Level	Maximum Output from 20 to 40,000 Hz: 25 dBu
Mute	Mutes main output only
Total Harmonic Distortion/Noise	At 1,000 Hz: 20 dBu output Main Output: better than 0.001% Buss Output measured at the 5014 monitor buss-mix amplifier output: better than 0.002% At 20 Hz, 20 dBu output Main Output: better than 0.002% Silk Engaged: better than 0.2% second harmonic
Crosstalk	Measured channel to channel: better than -90 dB at 15,000 Hz
Phantom Power	+48 VDC ±1%
Power Requirements	Voltage range: 9 to 18 VDC Current Consumption: At 9 VDC, current is 1.3 A typical: Power= 11.7W At 12 VDC, current is 1.0 A typical: Power= 12.0W At 15VDC, current is 0.8 A typical: Power= 12.0W At 18VDC, current is 0.65 A typical: Power= 11.7W
Dimensions (LxHxD)	9 x 1.75 x 8.5" (22.86 x 4.45 x 21.6 cm)
Weight	8 lb (3.6 kg)