The modern musician's multi-tool The Nu:Tekt NTS-2 oscilloscope kit is a DIY multifunctional tool for musicians. Building on a 4-channel oscilloscope - monitoring control voltage (CV) and audio signals alike - NTS-2 also packs a flexible waveform generator, a spectrum analyzer, and tuner functionality into a build-it-yourself device which fits in the palm of your hand! Originally released in a bundle with the critically acclaimed “PATCH & TWEAK with KORG”, the NTS-2 is now available as a stand-alone kit. The NTS-2 is perfect for musicians and creators of all backgrounds and levels of experience navigating their musical journey, providing solid tools and precise references to cultivate your craft. OscilloscopeDisplay modes: Single, Stereo (Input1L-INPUT1R, Input1L - Input2L, Input2L - Input2R), 4ch、XY(Lissajous, 2ch)Vertical: 10mV~5V/div, AC/DC MODE switchableHorizontal: 50us~1s/divTrigger: Auto, Rise, Fall, Single(rise), Single(fall)FFT (Spectrum Analyzer)Input: mono (1L, 1R, 2L, 2R)Frequency: 0Hz~20kHzFunction GeneratorWave type: sine, square, triangle, saw, noise, pulse, envelopeFrequency: 1Hz~10kHz, Hz/NOTE mode switchable, [1ms~10s,sec/BPM switchable(pulse, envelope mode)]Output level: 10Vpp max, V/dB mode switchableTunerDisplay mode: Needle, MeterInput: Mono, Stereo (Input1L-Input1R, Input1L-Input2L)Calibration: 410-480Hz

Metronome with 100 Rhythm Patterns, Built-in Chormatic Tuner, and 16-bit/44.1kHz Recorder

Whether you run it wirelessly or connect via USB, this 25-key microKEY Air makes mobile music creation a breeze. Dedicated pitch and mod wheels, plus a sustain pedal input also come in handy. Top it off with a sweet software package including titles from Korg, UVI, AAS, Propellerhead, and Ableton, and you can't go wrong with a microKEY Air.

Let the KORG SOS Sound on Sound Unlimited Track Recorder capture and preserve all of your inspired moments.

1-bit/2.8MHZ Handheld Recorder with Built-in Condenser Mic, 20GB Hard Drive, and USB 2.0

The new Korg MR-2 provides the same benefits to the audio enthusiast or recording professional— impeccable fidelity in a hand-held

1 x 4 USB Hub Hook up to your laptop or desktop computer Great for on the go

With Aurora, Lynx continues to be a leader in the world of digital audio. The Aurora A/D converters from Lynx Studio Technology provides unprecedented quality and control in 1U eight and sixteen channel models. The Aurora 8 and Aurora 16 feature 192kHz analog to digital and digital to analog conversion with front panel control of all routing and sample rate options. The rear panel has Clock and MIDI I/O connectors and an LSlot bay, for the optional use of ADAT and other audio interfaces. For excellent conversion quality, the Aurora 8 is your choice!

This Lynx Aurora 8 with preinstalled LT-TB option provides you with phenomenal, pro-quality digital conversion and extremely low-latency performance. The Aurora 8 gives you up to 192kHz analog to digital and digital to analog conversion with front panel control of all routing and sample rate options. Word clock and MIDI I/O connectors provide you with additional sync options, and the preinstalled LT-TB card provides you with maximum bandwidth and minimal latency. For excellent conversion quality, the Aurora 8 with LT-TB option is your choice!

A simple hardware remote used to control the system volume, LFE gain, and bass management bypass. A standard CAT-5 (or better) network cable, available from third parties, is required.

A kit to locate the electronics panel up to 30 m (90’) away from the loudspeaker cabinet. A standard 4-pole Speakon terminated loudspeaker cable, available from third parties, is required.

Mounting bracket for wall or ceiling fastening, or for fixing onto loudspeaker stands.

Adaptor for mounting on standard tripods with 35 mm (1 3/8”) diameter.

TV-spigot for mounting onto lighting stands or G-clamps and truss bars.

Wall bracket, can be tilted horizontally and vertically, tightens with bolts.

Tilting adaptor to tilt monitor in center of gravity up to max. 18° (13° for O 500 C). Has M20 thread for ceiling mount .

Adapter to fit the loudspeaker onto a tripod stand. Can be used with the LH 28, LH 29, or LH 37. Adding an LH 36 gives a tilting function.

'L' shaped adapter to mount a loudspeaker onto a wall.

Mounting hardware to vertically position a loudspeaker suspended off a ceiling.

Mounting adaptor plate to fit the LH 43, LH 45 or LH 46 with LH 12, LH 15, LH 25, LH 26, LH 28, LH 29, LH 38, LH 45, LH 61 and LH 80.

A mounting adapter with a M8 hole spacing of 70 mm to fit onto the loudspeaker, M8 hole spacings of 115 mm onto an LH 28, LH 29, LH 37, LH 47, LH 48 or K&M Design Stand, and a 3/8” thread for a microphone stand. Vertical adjustment is also possible over the range ±20°. The centre of gravity is centered over the middle of the loudspeaker/microphone stand so it is not unstable.

An adapter to convert a pair of 70 mm spaced M8 mounting points to the standard Omnimount 75, VESA 75, and VESA 100 mounting points.

The black GKH 310 Metal Grille from Neumann is designed to protect the drivers of the KH 310 A Active Studio Monitor.

Nickel Shockmount for Neumann M-147, TLM 103, and TLM 193

Black Shockmount for Neumann M-147, TLM 103, and TLM 193

The nickel EA 2 Elastic Suspension from Neumann has a swivel mount with a 5/8"-27 female thread. It also features a thread adapter to connect to 1/2" and 3/8" stands.

Elastic shockmount for your U87. These are satin silver.

The Neumann EA 170 is designed for the TLM 170R and the M 149 Tube microphones. It has a swivel mount with a 5/8"-27 female thread that can be fastened to tripods. Included is a threaded adapter to connect to 1/2"- and 3/8" studs.

The gray WKE 81 Windscreen Set from Neumann is designed for use with the KMR 81i Shotgun Microphone.

The gray WKE 82 Windscreen Set from Neumann is designed for use with the KMR 82i Shotgun Microphone.