Rupert Neve Designs RNDI-8 8-channel Active Direct Box 8-channel Active Direct Box with Custom Transformers, Discrete FET Input Amplifiers, and Per-channel Ground Lifts and -10dB Pads The RNDI-8 makes anything you plug into sound massive and amazing, yielding top-grade sound from 5Hz to far beyond 90kHz. You also get flexible per-channel ground lifts and individual -10dB pads to guarantee hum- and distortion-free operation. Product Features: Rupert Neve Custom Transformer Max input level +21 dBu (+31 dBu with pad on) Power supply via 48V phantom power per channel Ground lift and pin 1 isolate per channel to eliminate hum pickup -10dB pad 6.3mm Jack In 6.3mm Jack Thru XLR out Dimensions: 19" / 1U

Rupert Neve Designs RNHP Stereo Precision Headphone Amplifier 24V Stereo Headphone Amplifier with +4dBu Line, RCA, and 1/8" Stereo Inputs Rupert Neve Designs RNHP is a state-of-the-art headphone amplifier. The sonic performance and the ability to drive virtually any 'phones without compromise let you perform, mix, and savor your music with stunning clarity. Product Features: Based on the headphone amplifier section of the Rupert Neve Designs 5060 Centerpiece Three switchable inputs (XLR, RCA, mini-jack) Solid steel housing Output impedance: 0.08 Ohm at 1KHz Frequency response: +/- 0.2 dB from 10 to 12,0000 Hz Power supply: 24 V via an external 6 Watt power supply unit (included in the scope of delivery) Dimensions (W x D x H): 165 x 117 x 48 mm

Rupert Neve Designs 535 500 Series Diode Bridge Compressor 500 Series Diode-Bridge Compressor with Stepped Controls, Onboard Parallel Processing, Sidechain Highpass Filter, and Stereo Linking Rupert Neve Designs' 535 is a 500 Series diode-bridge compressor based on the topologies found in classic Neve designs such as the 2254.The 535 serves up the attitude-packed, in-your-face sound of Rupert Neve's renowned diode-bridge compressors, but with modern precision and flexibility which makes it ideal on any source. Product Features: Threshold range: Adjustable from -25 dB to +20 dB in 31 rasterized steps Ratio: Switchable from 1.5: 1 to 8: 1 in six steps Timing rotary switch: Six-digit rotary switch, with which the attack and release times of the compressor are adjusted Fast switch: Shares the attack and release times of the timing presets Blend knob to mix dry and wet signal Link function Sidechain HPF at 150 Hz Rasterized gain amplifier from -6 dB to +20 dB in 31 steps 8-Segment LED meter for level and level reduction Type: 500 Module

Rupert Neve Designs 545 500 Series Primary Source Enhancer Amazingly effective at reducing feedback without degrading the sonic integrity of the source, the 545 effectively increases the level of a live mic signal by up to 20dB before the onset of feedback. With its minimalist control set, the 545’s ease of use permits quick on-the-fly adjustments during performances and also makes it a good choice even for unattended, set-it-and-forget-it scenarios. Product Features: Reduces feedback without filtering the signal Increases the level of a microphone to feedback in a live sound environment by up to 20 dB Ideal for vocals Depth and threshold adjustable Time Constant RMS Mode: A: 50ms, B: 100ms, C: 200ms, D: 750ms, E: 1.5s, F: 3s Time Constant Peak Mode: Attack time: 20mS fix Release time: A: 20mS, B: 200mS, C: 1S, D: 2S, E: 5S, F: 30S Maximum output level: +25dBu Dimensions: 19" / 1U

Rupert Neve Designs 5057 Orbit Summing Mixer Fortified by Rupert’s revered Class A circuits, custom audio transformers, and Silk Red and Blue circuitry for variable harmonic saturation, the 5057 Orbit adds impressive flexibility to your setup, while enhancing lifeless, in-the-box mixes with authoritative weight, warmth, punch, depth, and clarity — without sacrificing the automated convenience of your digital audio workstation. Product Features: 16 Channel Class-A mix bus Silk Red & Blue modes with texture controls for precise control of sound characteristics Very low crosstalk for a wide stereo image and a sonic depth Cascadable via bus link with multiple 5057 units Input impedance: 16 K Ohm Frequency response: 10 to 50000 Hz: +/- 0.1 dB Max. input level at 1 kHz: +26 dBu Max. output level at 1 kHz: +26 dBu Distortion factor (from 22 Hz - 22 kHz): 0 dBu at 1 kHz: 0.003%, +20 dBu at 1 kHz: 0.0006% 2 x DB25 inputs (TASCAM standard) and XLR outputs Can be combined with other Rupert Neve Designs summing units via Buss Link Dimensions (W x D x H): 483 x 229 x 44 mm Weight: approx. 4 kg

Rupert Neve Designs 5025 Dual Shelford Microphone Preamplifier Product features: Class A input stage with specially developed transformers Up to 72 dB gain in 6 dB steps with +/- 6 dB trim Phase switch 48 V phantom power Continuously adjustable LoCut from 20 Hz to 250 Hz Silk Red and Blue circuitry Silk Red mode boosts harmonic content of highs and high mids Silk Blue mode boosts harmonic content of bass and low mids Rupert Neve custom output transformer VU meter Inputs: 2x XLR Outputs: 2x XLR (line out) 2x XLR ( -6 dB out) Dimensions: 19" / 1U