The Cable Kit from Genelec includes two 4-pin Speakon cables and one CAT5 cable for the 1237APM & 1238APM monitors. Each cable is 33' long.

Fixed wall mount bracket is suitable for 6010A loudspeaker system. It is available in black and white.

Fixed wall mount bracket is suitable for 6010A loudspeaker system. It is available in black and white.

The Genelec 8010 408 Stand Plate is designed for use with the IsoPod that ships with the 8010 monitors.

The white 8000-402W from Genelec is a wall mount designed for use with the 8000-Series monitor speakers. It is adjustable for proper speaker positioning.

Grille for 1036 main control room monitors.

Simply mount the stand plate onto the 3/8" thread on the tube and ensure tight screw connection. Place the IsoPod over the four pins of the stand plate

Handle strap is suitable for 8000 series monitoring systems.

The Genelec 8000-437B is a compact adapter that allows you to mount any 800-series monitor speaker to any kind of VESA 75/100 mount or accessory.

The Genelec 8040-408 is a metal stand mounting plate sized specifically to fit the Genelec 8040A Iso-Pod vibration isolator accessory.

The 1032-450B from Genelec is a stand plate that allows you to mount the 1032A or S30D monitor speakers to a floor stand. The plate has a standard 3/8" thread insert in the center, and offers 15 degrees of tilt. A rear press fit bar keeps the speaker cabinet securely on the plate.

MC100R 4/4 CELLO , Plywood Part ,Fingerboard , Sound Point

MC100R 4/4 CELLO , Rosewood Part ,Fingerboard , Sound Point

MV013W 4/4 VIOLIN Hardwood Parts

MV012RS 3/4 VIOLIN

MV012RS 1/2 VIOLIN

MV013E 3/4 Violin Ebony Parts

MV013E 4/4 VIOLIN EBONY PARTS

MBL014E 4/4 DOUBLEBASS , EBONY PARTS, Artificial Flame

Never comprising tone, the Hartke TX600 merges a classic tube preamp section with modern lightweight, Class D amplifier technology. This combination yields a bass amplifier with the warmth and character of a traditional amp, not to mention 600 watts of power, in a ultra-portable enclosure weighing only seven pounds. The TX600 was designed for performance, and you'll quickly find how easily and effectively it performs.

HyDrive transducers represent a revolutionary improvement in bass speaker technology and a major leap forward, fusing paper and aluminum in a roadworthy speaker design that is more robust and efficient than anything available.

Hartke proves that great tone doesn't need to cost a ton with the Hartke HD75 bass combo amp. Pushing 75 watts of power through a single 12" speaker and 1" tweeter, the HD75 is perfect for any rehearsal space or gig. When you're gigging out and about, durability is a must, and the HD75 will easily withstand being lugged from gig to gig. The Hartke HD75 bass combo amp is a great choice when you don't need a ton of power, but you also don't want to sacrifice tone.

The Hartke HyDrive HD410 weighs in at a mere 63 pounds, yet there's nothing lightweight about its performance. This 1,000-watt cabinet delivers clean output and even response, thanks to its two-piece composite cones. Double-roll curvilinear surrounds prevent over-excursion, yielding extremely smooth mids, as well as clear fundamentals and natural overtones. Experience tight, chest-thumping low end and superior projection, by virtue of the HD410's round-wire voice coils and sealed cabinet design. Beyond that, this road-ready bass cab features solid plywood construction with extensive bracing and dado joints, as well as a perforated steel grill and steel corners. The HyDrive HD410 is loaded with every feature a modern bassist could want.

The Hartke LH1000 is a 1000-watt bass amplifier head featuring a classic 12AX7 Class A tube front end with a solid-state output. Portable and roadworthy, the Hartke LH1000 offers both treble and bass shelving, so you can give its warm tone the edge you want. You can also tweak the bright and limiter switches to shape your sound even further. Rackmount it for the ultimate in convenience, and then plug in - there is a front-panel XLR balanced direct output, a rear-panel 1/4" effects loop, and a 1/4" output connector on the Hartke LH1000.

The Hartke LH500 is a 500-watt bass amplifier head featuring a classic 12AX7 Class A tube front end with a solid-state output. Portable and roadworthy, the Hartke LH500 offers both treble and bass shelving, so you can give its warm tone the edge you want. You can also tweak the bright and limiter switches to shape your sound even further. Rackmount it for the ultimate in convenience, and then plug in - there is a front-panel XLR balanced direct output, a rear-panel 1/4" effects loop, and 1/4" output connectors on the Hartke LH500.

The VX3500 combo combines the best selling classic Hartke 3500 amp with a killer Hartke speaker cabinet loaded with four 10" Hartke VX speakers and a high frequency driver.

Professionals choose the XL Series because of its carefully calibrated and tuned cabinet design and high quality aluminum-cone drivers.

HyDrive transducers represent a revolutionary improvement in bass speaker technology and a major leap forward, fusing paper and aluminum in a roadworthy speaker design that is more robust and efficient than anything available.

Hartke revisits the traditional paper cone driver with the new AK series of bass cabinets. These cabs offer exceptionally warm tone, natural coloration and awesome power thanks to their custom crafted paper cone drivers and specially tuned enclosures.