This website uses cookies to ensure you get the best experience on our website. Read more
MARKBASS CMD 102P IV-BASS COMBO AMPLIFIER
Brand
MARK BASS
MARK BASS
In stock
SKU
MARKBASS CMD 102P IV-BASS COMBO AMPLIFIER
AED 4,410.00
Product code: MBC105054Z
CMD 102P IV
This front-ported 2x10 combo is a great option for gigging bassists who want to cut through the mix without a big rig.
TECHNICAL FEATURES:
INPUTS
INPUT impedance: 1 Mohm, max. voltage: 9 Vpp
RETURN impedance: 22 Kohm, max. voltage: 10 Vpp
CONTROLS
GAIN –46 dB to +23 dB range
LINE OUT level control on front panel
PRE/POST EQ (for line out) switch on rear panel
GROUND LIFT switch on rear panel
MUTE SWITCH
MASTER VOLUME
EQUALIZATION
LOW: center frequency 68 Hz; level: ±16 dB
MID LOW: center frequency 360 Hz; level: ±16 dB
MID HIGH: center frequency 800 Hz; level: ±16 dB
HIGH: center frequency 10 kHz; level: ±16 dB
OLD SCHOOL: max cut range: 250 Hz – 20 kHz
3 WAY SWITCH: flat/scooped-mid/FSW
OUTPUTS
SEND EFFECTS: unbalanced, max. voltage 20 Vpp
TUNER OUT: unbalanced, max. voltage 2 Vpp
LINE OUT balanced XLR, max. voltage 20 Vpp
SPEAKER OUT: speakon/1/4” combo, 1/4”*
OTHERS
BI-BAND LIMITER
FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MID
OUTPUT POWER 500W RMS @ 4 ohm, 300W RMS @ 8 ohm
POWER REQUIREMENT:
100V; 120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale)
SPEAKER
2×10″
TWEETER
piezo
BASS PORT
front
IMPEDANCE
8 ohms
SENSITIVITY
101 dB SPL
SPEAKER POWER HANDLING
400W RMS (AES Standard)
FREQUENCY RESPONSE
40 Hz to 18 kHz
CROSSOVER FREQUENCY
3.5 kHz
WEIGHT
37.7 lbs / 17.1 Kg
WIDTH
23.03 in. / 58.5 cm
HEIGHT
18.5 in. / 47 cm
DEPTH
18.7 in. / 47.5 cm
Product code: MBC105054Z
CMD 102P IV
This front-ported 2x10 combo is a great option for gigging bassists who want to cut through the mix without a big rig
The wedge cabinet design allows to use it either in a standard vertical position or as floor monitor, offering to you the best monitoring on stage.
KEY POINTS:
> UPDATED 4 BAND EQ, OLD SCHOOL FILTER, 3 WAY SWITCH
4 band EQ section features very effective controls allowing you to easily find the sound you want, boosting or cutting up to 16dB for each of the 4 bands to cover all the tonal nuances needed in any genre of music.
> BI-BAND LIMITER
Our new bi-band limiter responds faster and more dynamically to your playing than traditional limiters do and lets your high end"breathe"for a more natural sound. It makes our amp heads the best choice for anyone who enjoys a quick, punchy attack at high volumes.
> WEDGE DESIGN
The angled cabinet design allows the unit to be used either as a floor monitor or in standard position.
> STACK WITH AN EXTENSION CABINET
If you add an external cabinet to the CMD 102P IV combo, you can fill a large venue with headroom to spare. This combo stacks perfectly with any Traveler or Standard series cabinets.
| Manufacturer | MARK BASS |
|---|
Write Your Own Review
