Markbass MB58R 104 PURE Box (4 Ω)

The Markbass MB58R 104 PURE (4 Ω) is a high-performance 4x10” bass cabinet designed for players who want powerful sound with minimal weight. Equipped with neodymium custom speakers and a hi-fi tweeter, it delivers clear highs, strong mids, and deep low-end. With 800 watts of power handling and a rear-ported, eco-friendly enclosure, this cabinet is perfect for stage, studio, or rehearsal environments where portability and clarity matter.

Specifications

• Speaker Configuration: 4 × 10″ neodymium custom speakers

• Tweeter: Hi-Fi tweeter

• Power Handling: 800 watts RMS

• Frequency Response: 40 Hz – 20 kHz

• Crossover Frequency: 3.5 kHz

• Sensitivity: 103 dB SPL

• Impedance: 4 Ohms

• Enclosure: Rear-ported, biodegradable material

• Dimensions: 57.8 × 60 × 47 cm

• Weight: 16.1 kg (35.5 lb)

Markbass MB58R 104 PURE Box (8 Ω)

The Markbass MB58R 104 PURE is a rugged yet ultralight 4×10″ bass cabinet built for players who demand high output and effortless transport. It features neodymium custom speakers paired with a hi‑fi tweeter for detailed highs and quick transient response. With a rear-ported enclosure and biodegradable construction materials, this cabinet delivers 800 W RMS power handling without heavy weight, making it an excellent choice for gigs, rehearsal, or compact rig setups.

Specifications

• Speaker configuration: 4 × 10″ neodymium custom speakers

• Tweeter type: Hi‑fi tweeter

• Power rating: 800 W RMS (AES standard)

• Frequency response: approx. 35 Hz – 20 kHz

• Crossover frequency: around 3.5 kHz

• Sensitivity: approximately 103 dB SPL

• Impedance: 8 Ω (also available in 4 Ω)

• Enclosure: rear‑ported, eco‑friendly composite material

• Dimensions: about 57.8 × 60 × 47 cm (22.8″ × 23.6″ × 18.5″)

• Weight: ~35.5 lb (≈ 16.1 kg)

The Little Mark Tube gives the warmth and richness of a tube preamp, or the clean attack of a solid state preamp… or a mix of both! On the front panel there are also two inputs with separate gain controls: one 1/4” jack, and one combo jack that accepts either a XLR or 1/4” cable. Additional features include switchable 48V phantom power for the XLR input, solid-state/tube mix control, four bands of equalization, VLE and VPF filters, line out level control, pre-post EQ switch for the XLR out (on rear panel), and mute control (push-pull on the master knob).

The Minimark 802 N300 Combo features the new NANO MARK II head, which offers a myriad of tone shaping options on the go with its complete and effective 4 band EQ controls. Plus, thanks to the included input jack insert (or an optional single footswitch) connected to the dedicated FSW input you can easily have fast access to a scooped-mid EQ setting to get a tight tone for slap or pick bass. And as highly requested, the head is REMOVABLE!
Not only can you use the head separately, you can use the combo's 2x8"cabinet standalone matched with a different head, or as an extension of another combo, or even together with another 8 ohm cabinet. The two 8"custom woofers and an onboard piezo tweeter give an incredible warm and focused sound - making this combo a brilliant choice for electric bass and also ideal for double bass as well as acoustic bass through its faithful reproduction of acoustic instruments!

The MB58R series is a further example of how Markbass is always one step ahead in innovating using state-of-the-art technologies. Once again Marco De Virgiliis with his pioneering soul has managed to create this new series of products which, with the use of custom components born thanks to years of experience and research Markbass and the use of revolutionary materials with an eye to the future and the evironment, has really nailed the tone and power versus portability issue.
The MB58R 104 ENERGY features 4x10"Markbass Neodymium custom speakers and 1"driver with horn, boasts an impressive 800W of power handling and weights 36.4 lbs / 16.5 kg . This cabinet works great on its own, plus the 8ohm version makes up an amazing stack when added to another Markbass 8 ohm cab (for example, another MB58R 104 ENERGY or a MB58R 151 ENERGY).

The MB58R series is a further example of how Markbass is always one step ahead in innovating using state-of-the-art technologies. Once again Marco De Virgiliis with his pioneering soul has managed to create this new series of products which, with the use of custom components born thanks to years of experience and research Markbass and the use of revolutionary materials with an eye to the future and the evironment, has really nailed the tone and power versus portability issue.
The MB58R CMD 102 PURE features 2x10"Markbass Neodymium custom speakers delivering lows that are tight
and fat with a pleasing earthy growl and clean, clear highs from the new hi-fi tweeter. Plus , this combo is ultraportable, it weighs only 30 lbs / 13.6 kg!

The MB58R series is a further example of how Markbass is always one step ahead in innovating using state-of-the-
art technologies. Once again Marco De Virgiliis with his pioneering soul has managed to create this new series of products which, with the use of custom components born thanks to years of experience and research Markbass
and the use of revolutionary materials with an eye to the future and the evironment, has really nailed the tone and
power versus portability issue. The MB58R CMD 151 PURE combo sends out 300W of power through a single 15"Markbass Neodymium custom speaker and new hi-fi tweeter. Highly portable thanks to the cabinet material and technology (only 31.7 lbs / 14.4 kg) and astoundingly loud for its size, it’s the practical solution for those who like the sound of 15” speakers.

Powerful Tone. Exceptional Portability. Eco-Friendly Design.

The Markbass MB58R 122 ENERGY is a high-performance bass cabinet that combines robust sound output with a lightweight, environmentally conscious design. Equipped with two 12" neodymium custom speakers and a 1" driver with a horn, this cabinet delivers 800W RMS of rich, full-range tone suitable for various musical applications. Its innovative construction ensures durability while keeping the weight at just 17.5 kg, making it an ideal choice for gigging musicians.

Key Features:

• Speaker Configuration: 2×12" Markbass Neodymium Custom

• Tweeter: 1" Driver with Horn

• Power Handling: 800W RMS (AES Standard)

• Frequency Response: 45 Hz – 20 kHz

• Crossover Frequency: 3.5 kHz

• Sensitivity: 103 dB SPL

• Impedance Options: 4 or 8 Ohms

• Reflex: Rear

• Dimensions: 57.8 cm (W) × 60 cm (H) × 47 cm (D)

• Weight: 17.5 kg

• Construction: Eco-friendly, lightweight materials

• Origin: Made in Italy

Vintage Warmth Meets Modern Power in a Compact Design

The Markbass Little Mark Vintage 1000 is a high-powered bass amplifier head that combines classic tube warmth with cutting-edge technology. Part of Markbass's esteemed Gold Line series, this amp delivers 1000W of pure, dynamic tone in a lightweight and portable chassis. Whether you're performing on large stages or in intimate venues, the Little Mark Vintage 1000 ensures your bass sound remains rich, clear, and impactful.

Key Features:

• Tube Preamp: Equipped with an ECC83 (12AX7) tube, providing a warm and harmonically rich tone.

• 1000W MPT Power Amp: Mark Proprietary Technology ensures ample headroom and dynamic response, delivering 1000W at 4 ohms and 600W at 8 ohms.

• 4-Band EQ: Precisely tuned frequencies—Low (68 Hz), Low Mid (400 Hz), High Mid (2200 Hz), High (10 kHz)—each adjustable by ±16 dB for versatile tone shaping.

• 3-Way EQ Preset Switch:

  • FLAT: Neutral EQ setting.

  • CUT: Scooped mids with enhanced lows and highs.

  • OLD: Vintage-style tone with reduced highs.

• Limiter Control: Adjustable from 0 to MAX, allowing for modern compression or vintage-style distortion.

• Balanced DI Output: Transformer-balanced XLR out with Pre/Post EQ and Ground Lift switches, providing a clean and pure signal for recording or live sound.

• Footswitch Compatibility: Optional dual footswitch enables Mute and EQ ON/OFF functions for seamless control during performances.

• Gold Line Components: Features gold-plated circuits and top-quality selected components for superior sound purity and reliability.

Massive power and Ultimate portability.

This 1000W signature bass head features a powerful solid-state preamp with Markbass’s custom MPT power amp technology. Its tailored EQ section and clear tone make it ideal for any style—from gospel to funk to fusion. Whether on stage or in the studio, the Little AG 1000 keeps your sound fat, clean, and expressive.

Key Features:

• Power Output: 1000W @ 4 ohms / 600W @ 8 ohms

• Custom EQ: 5-band EQ designed with Andrew Gouché for ultimate tonal control

• Preamp: Solid state

• Limiter: Bi-band for smooth dynamics

• Mute & EQ Footswitch Option: For live flexibility

• Balanced XLR Line Out: With Pre/Post EQ and Ground Lift

• Weight: Just 3.2 kg – perfect for gigging bassists

• Dimensions: 27.6 x 25 x 8.3 cm

The Markbass MB58R 102 XL ENERGY is a lightweight, high-performance 2x10" bass cabinet designed for musicians seeking powerful sound and easy portability. Equipped with two 10" neodymium custom speakers and a 1" driver with horn, it delivers 400W RMS of clear, punchy tone across a wide frequency range.

Key Features:

• Speakers: 2x10" Markbass neodymium custom

• Tweeter: 1" driver with horn

• Power Handling: 400W RMS

• Frequency Response: 40Hz – 20kHz

• Sensitivity: 101 dB SPL

• Crossover Frequency: 3.5 kHz

• Impedance: Available in 4 or 8 ohms

• Dimensions: 57.8 cm (W) x 60 cm (H) x 47 cm (D)

• Weight: Approximately 14.6 kg (32.2 lbs)

Deep Tone. Ultra-Lightweight. Road-Ready.
The MB58R 151 ENERGY delivers rich, full-bodied bass in a compact, eco-friendly design. Featuring a custom 15" neodymium speaker and a 1" high-frequency driver, this cabinet offers 400W RMS power handling, ensuring clarity and punch across the frequency spectrum. Its innovative construction provides an exceptional power-to-weight ratio, making it ideal for gigging musicians seeking portability without compromising sound quality.

Key Features:

• Speaker Configuration: 1×15" Markbass Neodymium Custom

• Tweeter: 1" driver with custom horn

• Power Handling: 400W RMS (AES Standard)

• Frequency Response: 40 Hz – 20 kHz

• Crossover Frequency: 3.5 kHz

• Sensitivity: 100 dB SPL

• Impedance: 8 Ohms

• Construction: Eco-friendly, ultra-lightweight materials

• Dimensions: 57.8 cm (W) × 60 cm (H) × 47 cm (D)

• Weight: 15.2 kg

The flagship Markbass amplifier, the Little Mark III is the industry standard for tone, portability and value.
This amp adds some high-requested features to its famous predecessor Little Mark II, with the same compact size and weight!
The Little Mark III's solid-state preamp has a warm and natural sound, and faithfully reproduces the true tone of your instrument. The 500-watt Markbass power amp (Markbass Proprietary Technology) supplies impeccable bass frequency reproduction. The new DI output features a pre-post EQ switch and output level control, so you can optimize the signal you send to the mixer or recording unit.

The Little Mark Tube solves the “tube or solid state” dilemma. The Little Mark Tube 800 goes a step further by also addressing that other perennial concern, “Will I have enough power?” The 800 watts from this powerful amp will satisfy any thirst for power, and the two blendable preamps give you the warmth and richness of a tube preamp, the clean attack of a solid state preamp… or a mix of both!

The LITTLE MARCUS infact only suits Marcus needs and taste, but is a great choice for every bassist who needs a head amp with an amazing clear definition, punch and dynamic, respecting the priority of tone like all the Little Mark heads.
It offers simple and very effective controls on EQ1 to taylor your sound for any kind of genres and styles, and the two new Old School and Millerizer filters featured on EQ2 taylored together with Marcus allows to quick obtain a vintage tone or an amazing slap sound.

The LITTLE MARCUS 800 not only suits Marcus needs and taste, but is a great choice for every bassist who needs a head amp with an amazing clear definition, punch and dynamic, respecting the priority of tone like all the Little Mark heads, plus its 800W MPT power amp makes this head a great choice for big-stage applications, and for louder bands.  
It offers simple and very effective controls on EQ1 to taylor your sound for any kind of genres and styles, and the two new Old School and Millerizer filters featured on EQ2 taylored together with Marcus allows to quick obtain a vintage tone or an amazing slap sound.

The Black Line version of Little Mark 250 offers the same features as the standard Little Mark 250. The Black Line products are made using the same cutting-edge technology, high-quality components and the same quality control standards that apply to all of our products.
The Little Mark 250 Black Line is a smart, inexpensive choice for those who don’t need the full power of a 500W head. It’s great for practicing, rehearsing, and small gigs.

Jeff Berlin’s signature combo has top-quality 15” tone and no tweeter. Easily upgrades to a 500W rig with the addition of a New York 151 cabinet.

Markbass top-artist Jeff Berlin has finally found the tone he's been searching for. And although we can't guarantee that Jeff's Signature Combo will make you sound like him, it will definitely make you sound more like you!

The Micromark now has a big brother—one who is still small enough to deliver the Markbass sound anywhere, but big enough to provide a fuller sound with plenty of bottom end!
The Micromark 801 features a single yellow 8” Markbass custom speaker.
The original (6”) Micromark has been astounding people since its first introduction a few years ago, but this version is even more sonically impressive!