This website uses cookies to ensure you get the best experience on our website. Read more
-
Hartke TX600 - Bass Amplifier
25% Off
Never comprising tone, the Hartke TX600 merges a classic tube preamp section with modern lightweight, Class D amplifier technology. This combination yields a bass amplifier with the warmth and character of a traditional amp, not to mention 600 watts of power, in a ultra-portable enclosure weighing only seven pounds. The TX600 was designed for performance, and you'll quickly find how easily and effectively it performs.hartke-tx600-bass-amplifier -
Hartke HD75 1x12" 75-watt Bass Combo Amp
25% Off
Hartke proves that great tone doesn't need to cost a ton with the Hartke HD75 bass combo amp. Pushing 75 watts of power through a single 12" speaker and 1" tweeter, the HD75 is perfect for any rehearsal space or gig. When you're gigging out and about, durability is a must, and the HD75 will easily withstand being lugged from gig to gig. The Hartke HD75 bass combo amp is a great choice when you don't need a ton of power, but you also don't want to sacrifice tone.HARTKE-HYDRIVE-75W-COMBO-12 -
Hartke HyDrive HD410 - 1,000-watt 4x10" Bass Cabinet
25% Off
The Hartke HyDrive HD410 weighs in at a mere 63 pounds, yet there's nothing lightweight about its performance. This 1,000-watt cabinet delivers clean output and even response, thanks to its two-piece composite cones. Double-roll curvilinear surrounds prevent over-excursion, yielding extremely smooth mids, as well as clear fundamentals and natural overtones. Experience tight, chest-thumping low end and superior projection, by virtue of the HD410's round-wire voice coils and sealed cabinet design. Beyond that, this road-ready bass cab features solid plywood construction with extensive bracing and dado joints, as well as a perforated steel grill and steel corners. The HyDrive HD410 is loaded with every feature a modern bassist could want.HD410 -
Hartke LH1000 - 1000-Watt Bass Head
25% Off
The Hartke LH1000 is a 1000-watt bass amplifier head featuring a classic 12AX7 Class A tube front end with a solid-state output. Portable and roadworthy, the Hartke LH1000 offers both treble and bass shelving, so you can give its warm tone the edge you want. You can also tweak the bright and limiter switches to shape your sound even further. Rackmount it for the ultimate in convenience, and then plug in - there is a front-panel XLR balanced direct output, a rear-panel 1/4" effects loop, and a 1/4" output connector on the Hartke LH1000.LH1000 -
Hartke LH500 - 500-Watt Bass Head
The Hartke LH500 is a 500-watt bass amplifier head featuring a classic 12AX7 Class A tube front end with a solid-state output. Portable and roadworthy, the Hartke LH500 offers both treble and bass shelving, so you can give its warm tone the edge you want. You can also tweak the bright and limiter switches to shape your sound even further. Rackmount it for the ultimate in convenience, and then plug in - there is a front-panel XLR balanced direct output, a rear-panel 1/4" effects loop, and 1/4" output connectors on the Hartke LH500.LH500 -
-
-
Hartke HyDrive 5210C - Bass Combo
25% Off
HyDrive transducers represent a revolutionary improvement in bass speaker technology and a major leap forward, fusing paper and aluminum in a roadworthy speaker design that is more robust and efficient than anything available.5210C -
Hartke 210XL Bass Cabinet
32% Off
Professionals choose the XL Series because of its carefully calibrated and tuned cabinet design and high quality aluminum-cone drivers. XLs produce a smooth response along with the clear, punchy attack that changed the sound of bass. Each cabinet is built tough with a shockproof metal grill, reinforced corners, recessed carry handles and a rugged covering.210XL -
MARKBASS MB58R 104 Pure Box 4ohm
Markbass MB58R 104 PURE Box (4 Ω)
The Markbass MB58R 104 PURE (4 Ω) is a high-performance 4x10” bass cabinet designed for players who want powerful sound with minimal weight. Equipped with neodymium custom speakers and a hi-fi tweeter, it delivers clear highs, strong mids, and deep low-end. With 800 watts of power handling and a rear-ported, eco-friendly enclosure, this cabinet is perfect for stage, studio, or rehearsal environments where portability and clarity matter.
Specifications
Speaker Configuration: 4 × 10″ neodymium custom speakers
Tweeter: Hi-Fi tweeter
Power Handling: 800 watts RMS
Frequency Response: 40 Hz – 20 kHz
Crossover Frequency: 3.5 kHz
Sensitivity: 103 dB SPL
Impedance: 4 Ohms
Enclosure: Rear-ported, biodegradable material
Dimensions: 57.8 × 60 × 47 cm
Weight: 16.1 kg (35.5 lb)
MBL100117 -
MARKBASS MB58R 104 PURE Box 8ohm
Markbass MB58R 104 PURE Box (8 Ω)
The Markbass MB58R 104 PURE is a rugged yet ultralight 4×10″ bass cabinet built for players who demand high output and effortless transport. It features neodymium custom speakers paired with a hi‑fi tweeter for detailed highs and quick transient response. With a rear-ported enclosure and biodegradable construction materials, this cabinet delivers 800 W RMS power handling without heavy weight, making it an excellent choice for gigs, rehearsal, or compact rig setups.
Specifications
Speaker configuration: 4 × 10″ neodymium custom speakers
Tweeter type: Hi‑fi tweeter
Power rating: 800 W RMS (AES standard)
Frequency response: approx. 35 Hz – 20 kHz
Crossover frequency: around 3.5 kHz
Sensitivity: approximately 103 dB SPL
Impedance: 8 Ω (also available in 4 Ω)
Enclosure: rear‑ported, eco‑friendly composite material
Dimensions: about 57.8 × 60 × 47 cm (22.8″ × 23.6″ × 18.5″)
Weight: ~35.5 lb (≈ 16.1 kg)
MBL100104 -
Markbass Little Mark Tube
The Little Mark Tube gives the warmth and richness of a tube preamp, or the clean attack of a solid state preamp… or a mix of both! On the front panel there are also two inputs with separate gain controls: one 1/4” jack, and one combo jack that accepts either a XLR or 1/4” cable. Additional features include switchable 48V phantom power for the XLR input, solid-state/tube mix control, four bands of equalization, VLE and VPF filters, line out level control, pre-post EQ switch for the XLR out (on rear panel), and mute control (push-pull on the master knob).
MBH110021Z -
Markbass Minimark 802 N 300
The Minimark 802 N300 Combo features the new NANO MARK II head, which offers a myriad of tone shaping options on the go with its complete and effective 4 band EQ controls. Plus, thanks to the included input jack insert (or an optional single footswitch) connected to the dedicated FSW input you can easily have fast access to a scooped-mid EQ setting to get a tight tone for slap or pick bass. And as highly requested, the head is REMOVABLE!
Not only can you use the head separately, you can use the combo's 2x8"cabinet standalone matched with a different head, or as an extension of another combo, or even together with another 8 ohm cabinet. The two 8"custom woofers and an onboard piezo tweeter give an incredible warm and focused sound - making this combo a brilliant choice for electric bass and also ideal for double bass as well as acoustic bass through its faithful reproduction of acoustic instruments!MBC105073 -
Markbass MB58R 104 Energy-4
Markbass MB58R 104 Energy-4 PRODUCT CODE: MBL100114YThe MB58R series is a further example of how Markbass is always one step ahead in innovating using state-of-the-art technologies. Once again Marco De Virgiliis with his pioneering soul has managed to create this new series of products which, with the use of custom components born thanks to years of experience and research Markbass and the use of revolutionary materials with an eye to the future and the evironment, has really nailed the tone and power versus portability issue.
The MB58R 104 ENERGY features 4x10"Markbass Neodymium custom speakers and 1"driver with horn, boasts an impressive 800W of power handling and weights 36.4 lbs / 16.5 kg . This cabinet works great on its own, plus the 8ohm version makes up an amazing stack when added to another Markbass 8 ohm cab (for example, another MB58R 104 ENERGY or a MB58R 151 ENERGY).markbass mb58r 104 energy-4 -
Markbass MB58R CMD 102 Pure
The MB58R series is a further example of how Markbass is always one step ahead in innovating using state-of-the-art technologies. Once again Marco De Virgiliis with his pioneering soul has managed to create this new series of products which, with the use of custom components born thanks to years of experience and research Markbass and the use of revolutionary materials with an eye to the future and the evironment, has really nailed the tone and power versus portability issue.
The MB58R CMD 102 PURE features 2x10"Markbass Neodymium custom speakers delivering lows that are tight
and fat with a pleasing earthy growl and clean, clear highs from the new hi-fi tweeter. Plus , this combo is ultraportable, it weighs only 30 lbs / 13.6 kg!MBC105087 -
MARKBASS MB58R CMD 151P- BASS AMP COMBO
MB58R CMD 151 P Product code: MBC105094 The MB58R series is a further example of how Markbass is always one step ahead in innovating using state-of-the-art technologies. Once again Marco De Virgiliis with his pioneering soul has managed to create this new series of products which, with the use of custom components born thanks to years of experience and research Markbass and the use of revolutionary materials with an eye to the future and the evironment, has really nailed the tone and power versus portability issue. The MB58R CMD 151 P features 1x15"Markbass classic ceramic speaker and a new piezo tweeter. The P series is created for those who like classic speakers but don’t want to carry heavy stuff, thanks to the revolutionary material used for the cabinet enclosure, the MB58R CMD 151Pweighs only 32.1 lbs / 14.6 kg! TECHNICAL FEATURES: SPEAKER 1×15” Markbass classic ceramic TWEETER new piezo tweeter SPEAKER POWER HANDLING 300W RMS (AES Standard) REFLEX Rear IMPEDANCE 8 ohms CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONCE 40Hz to 18KHz SENSITIVITY DB SPL 100dB CONTROLS GAIN | 4-BAND EQ | VLE – VPF FILTERS MASTER VOLUME | LINE OUT level control PRE/POST EQ e GND switches OUTPUT POWER 300W RMS @ 4 ohm, 150W RMS @ 8 ohm DIMENSIONS 17.72”/ 45cm (w); 22.68”/ 57.6cm (h); 18.54”/ 47.1cm (d) WEIGHT 32.1 lbs / 14.6 kgMARKBASS MB58R CMD 151P- BASS AMP COMBO -
MARKBASS MB58R CMD 102P- BASS COMBO
MB58R CMD 102 P Product code: MBC105092 The MB58R series is a further example of how Markbass is always one step ahead in innovating using state-of-the-art technologies. Once again Marco De Virgiliis with his pioneering soul has managed to create this new series of products which, with the use of custom components born thanks to years of experience and research Markbass and the use of revolutionary materials with an eye to the future and the evironment, has really nailed the tone and power versus portability issue. TheMB58R CMD 102 P features 2x10"Markbass classic ceramic speaker and a new piezo tweeter. The P series is created for those who like classic speakers but don’t want to carry heavy stuff, thanks to the revolutionary material and technology used for the cabinet enclosure, the MB58R CMD 102P weighs only 35.3 lbs /16 kg! TECHNICAL FEATURES SPEAKER 2×10” Markbass classic ceramic TWEETER New piezo tweeter SPEAKER POWER HANDLING 300W RMS (AES Standard) REFLEX Rear IMPEDANCE 8 ohms CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONCE 40Hz to 18KHz SENSITIVITY DB SPL 101dB CONTROLS GAIN | 4-BAND EQ | VLE – VPF FILTERS MASTER VOLUME | LINE OUT level control PRE/POST EQ e GND switches OUTPUT POWER 300W RMS @ 4 ohm, 150W RMS @ 8 ohm DIMENSIONS 17.72”/ 45cm (w); 22.68”/ 57.6cm (h); 18.64”/ 47.1cm (d) WEIGHT 35.3 lbs /16 kgMARKBASS MB58R CMD 102P- BASS COMBO -
Markbass MB58R CMD 151 Pure
The MB58R series is a further example of how Markbass is always one step ahead in innovating using state-of-the-
art technologies. Once again Marco De Virgiliis with his pioneering soul has managed to create this new series of products which, with the use of custom components born thanks to years of experience and research Markbass
and the use of revolutionary materials with an eye to the future and the evironment, has really nailed the tone and
power versus portability issue. The MB58R CMD 151 PURE combo sends out 300W of power through a single 15"Markbass Neodymium custom speaker and new hi-fi tweeter. Highly portable thanks to the cabinet material and technology (only 31.7 lbs / 14.4 kg) and astoundingly loud for its size, it’s the practical solution for those who like the sound of 15” speakers.MBC105089 -
MARKBASS MB58R CMD 121P-BASS AMP COMBO
MB58R CMD 121 P Product code: MBC105093 The MB58R series is a further example of how Markbass is always one step ahead in innovating using state-of-the-art technologies. Once again Marco De Virgiliis with his pioneering soul has managed to create this new series of products which, with the use of custom components born thanks to years of experience and research Markbass and the use of revolutionary materials with an eye to the future and the evironment, has really nailed the tone and power versus portability issue. TheMB58R CMD 121 P features 1x12"Markbass classic ceramic speaker and a new piezo tweeter. The P series is created for those who like classic speakers but don’t want to carry heavy stuff, thanks to the revolutionary material AND TECHNOLOGY used for the cabinet enclosure, the MB58R CMD 121P weighsonly 31.6 lbs / 14.3 kg! TECHNICAL FEATURES: SPEAKER 1×12” Markbass classic ceramic TWEETER new piezo tweeter SPEAKER POWER HANDLING 300W RMS (AES Standard) REFLEX Rear IMPEDANCE 8 ohms CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONCE 45Hz to 18KHz SENSITIVITY DB SPL 99dB CONTROLS GAIN | 4-BAND EQ | VLE – VPF FILTERS MASTER VOLUME | LINE OUT level control PRE/POST EQ e GND switches OUTPUT POWER 300W RMS @ 4 ohm, 150W RMS @ 8 ohm DIMENSIONS 17.72”/ 45cm (w); 22.68”/ 57.6cm (h); 18.64”/ 47.1cm (d) WEIGHT 31.6 lbs / 14.3 kgMARKBASS MB58R CMD 121P-BASS AMP COMBO -
MARKBASS NEW YORK 121-COMPACT CABINET
Product code: MBL100026Y New York 121 The Mini CMD 121P, has found its perfect companion! This is our lightest and most compact cabinet ever, and serves as a great extension cabinet for our combos: with this cab added, your combo turns into a 500W rig! This is also a small but mighty match for any of our 250-500W heads. SPECIFICATIONS: Power handling 400w Series New york Size S Speaker config 1x12" Impedance 8ohm Tweeter Piezo Tuned port Rear TECHNICAL FEATURES IMPEDANCE 8 ohms SPEAKER SIZE 1×12 in. BASS PORT rear TWEETER piezo POWER HANDLING 400W RMS (AES Standard) CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONSE 45 Hz to 18 kHz SENSITIVITY 100 dB SPL WEIGHT 29.98 lbs / 13.6 Kg WIDTH 14.96 in. / 38 cm HEIGHT 16.73 in. / 42.5 cm DEPTH 14.17 in. / 36 cmMARKBASS NEW YORK 121-COMPACT CABINET -
MARKBASS LITTLE MARK IV NINJA- BASS AMP HEAD
Product code: MBH110104Z LITTLE MARK IV NINJA > MPT - MARK PROPRIETARY TECHNOLOGY Many other bass amps on the market use power amps that are not specifically designed for bass. Markbass invested heavily in R&D to develop proprietary power amp technology in house. The MPT power amp was built from the ground up to respect and elevate the inherent tone of your instrument. TECHNICAL FEATURES:INPUTS INPUT impedance: 1 Mohm, max. voltage: 9 Vpp RETURN impedance: 22 Kohm, max. voltage: 10 Vpp CONTROLS GAIN –46 dB to +23 dB range LINE OUT level control on front panel PRE/POST EQ (for line out) switch on rear panel GROUND LIFT switch on rear panel MUTE SWITCH MASTER VOLUME EQUALIZATION LOW: center frequency 68 Hz; level: ±16 dB MID LOW: center frequency 360 Hz; level: ±16 dB MID HIGH: center frequency 800 Hz; level: ±16 dB HIGH: center frequency 10 kHz; level: ±16 dB OLD SCHOOL: max cut range: 250 Hz – 20 kHz 3 WAY ROTARY SWITCH: flat/scooped-mid/FSW OUTPUTS SEND EFFECTS: unbalanced, max. voltage 20 Vpp TUNER OUT: unbalanced, max. voltage 2 Vpp LINE OUT balanced XLR, max. voltage 20 Vpp SPEAKER OUT: speakon DIMENSIONS AND WEIGHT HEIGHT: 2 rack units (3.27 in. / 83 mm) WIDTH: 10.87 in. / 27.6 cm (19 in. / 48.3 cm with optional rack ears) DEPTH: 9.84 in. / 25 cm WEIGHT: 6.17 lbs / 2.8 kg OTHERS BI-BAND LIMITER FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MID OUTPUT POWER: 1000W RMS @ 4 ohm, 600W RMS @ 8 ohm POWER REQUIREMENT: 100V; 120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale)MARKBASS LITTLE MARK IV NINJA- BASS AMP HEAD -
MARKBASS CMD 102P IV-BASS COMBO AMPLIFIER
Product code: MBC105054Z CMD 102P IV This front-ported 2x10 combo is a great option for gigging bassists who want to cut through the mix without a big rig. TECHNICAL FEATURES: INPUTS INPUT impedance: 1 Mohm, max. voltage: 9 Vpp RETURN impedance: 22 Kohm, max. voltage: 10 Vpp CONTROLS GAIN –46 dB to +23 dB range LINE OUT level control on front panel PRE/POST EQ (for line out) switch on rear panel GROUND LIFT switch on rear panel MUTE SWITCH MASTER VOLUME EQUALIZATION LOW: center frequency 68 Hz; level: ±16 dB MID LOW: center frequency 360 Hz; level: ±16 dB MID HIGH: center frequency 800 Hz; level: ±16 dB HIGH: center frequency 10 kHz; level: ±16 dB OLD SCHOOL: max cut range: 250 Hz – 20 kHz 3 WAY SWITCH: flat/scooped-mid/FSW OUTPUTS SEND EFFECTS: unbalanced, max. voltage 20 Vpp TUNER OUT: unbalanced, max. voltage 2 Vpp LINE OUT balanced XLR, max. voltage 20 Vpp SPEAKER OUT: speakon/1/4” combo, 1/4”* OTHERS BI-BAND LIMITER FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MID OUTPUT POWER 500W RMS @ 4 ohm, 300W RMS @ 8 ohm POWER REQUIREMENT: 100V; 120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale) SPEAKER 2×10″ TWEETER piezo BASS PORT front IMPEDANCE 8 ohms SENSITIVITY 101 dB SPL SPEAKER POWER HANDLING 400W RMS (AES Standard) FREQUENCY RESPONSE 40 Hz to 18 kHz CROSSOVER FREQUENCY 3.5 kHz WEIGHT 37.7 lbs / 17.1 Kg WIDTH 23.03 in. / 58.5 cm HEIGHT 18.5 in. / 47 cm DEPTH 18.7 in. / 47.5 cmMARKBASS CMD 102P IV-BASS COMBO AMPLIFIER -
MARKBASS NANO MARK II- BASS HEAD AMP
Product code: MBH110101Z NANO MARK II TECHNICAL FEATURES INPUTS INPUT impedance: 1 Mohm, max. voltage: 15 Vpp RETURN impedance: 33 Kohm, max. voltage: 10 Vpp CONTROLS GAIN –60 dB to +23 dB range PRE/POST EQ (for line out) switch on rear panel GROUND LIFT switch on rear panel FOOTSWITCH (not included) for flat/scooped switch MASTER VOLUME EQUALIZATION LOW: center frequency 60 Hz; level: ±16 dB MID LOW: center frequency 360 Hz; level: ±16 dB MID HIGH: center frequency 800 Hz; level: ±16 dB HIGH: center frequency 5 kHz; level: ±16 dB OUTPUTS SEND EFFECTS: unbalanced, max. voltage 20 Vpp (Pre Eq) LINE OUT balanced XLR, Maximum Voltage 10 Vpp, Impedance 600 ohm SPEAKER OUT: speakon/1/4” combo DIMENSIONS AND WEIGHT WIDTH: 7.87 in. / 20 cm DEPTH: 8.27 in. / 21 cm HEIGHT: 2.09 in. / 5.3 cm WEIGHT: 3.20 lbs / 1.45 kg OUTPUT POWER 300W RMS @ 4 ohm, 150W RMS @ 8 ohm POWER REQUIREMENT 100/120V; 230V; 240V 50/60Hz (Voltage is factory preset according to region of sale) OTHERS BI-BAND LIMITER FOOTSWITCH (OPTIONAL): FLAT/SCOOPED-MIDMARKBASS NANO MARK II- BASS HEAD AMP -
MARKBASS LITTLE MARCUS 58R-BASS AMP HEAD
LITTLE MARCUS 58R Product code: MBH110122Z The new LITTLE MARCUS 58R is ready to replicate the worldwide success of Marcus Miller signature. It features all the connections and controls on the front panel leaving on the rear panel only the speaker outs and AC power socket, offering optimal ergonomics and making everything more practical. TECHNICAL FEATURES: PREAMP Solid State POWER AMP MPT (MARK PROPRIETARY TECHNOLOGY) POWER 500W@4ohm / 300W@8ohm EQ1 ULTRALOW – LOW – MID/LOW – MID/HIGH – HIGH EQ2 MILLERIZER and OLD SCHOOL filters OTHER FEATURES XLR Line Out with Level Control and Pre/Post EQ and GND Lift switches BI-BAND LIMITER | MUTE switch FX Send/Return Footswitch (optional) to turn on/off EQ1 and Eq2 DIMENSIONS 10.87”/ 27.6 cm (w); 3.27”/ 8.3 cm (h); 10.08”/ 25.6 cm(d) WEIGHT 4.78 lbs / 2,17 kgMARKBASS LITTLE MARCUS 58R-BASS AMP HEAD -
MARKBASS MB58R MINI CMD 121 PURE- BASS AMP COMBO
MB58R MINI CMD 121 PURE Product code: MBC105086Z The MB58R MINI CMD 121 PURE features 1x12"Markbass Neodymium custom speaker and a new hi-fi tweeter. this combo continues to lead the pack when it comes to big sound from a small package. The sound that comes from this amp simply does not match what you see when you look at such a small and ultralight cube. TECHNICAL FEATURES: SPEAKER 1 x 12” Neodimium Custom TWEETER Markbass hi-fi tweeter SPEAKER POWER HANDLING 400W RMS (AES Standard) REFLEX Rear REAR 8 ohms CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONCE 45Hz to 20KHz SENSITIVITY DB SPL 99dB CONTROLS GAIN | 4-BAND EQ | OLD SCHOOL FILTER MUTE SWITCH | MASTER VOLUME LINE OUT level control | PRE/POST EQ e GND switches 3 WAY SWITCH: flat/scooped-mid/FSW OUTPUT POWER 500W RMS @ 4 ohm, 300W RMS @ 8 ohm OTHERS BI-BAND LIMITER | FSW (OPTIONAL) mute/scooped DIMENSIONS 15.35”/ 39cm (w); 18.50”/ 47 cm (h); 14.17”/ 36 cm (d) WEIGHT 21.7 lbs / 10.3kgMARKBASS MB58R MINI CMD 121 PURE- BASS AMP COMBO -
MARKBASS MB58R 104 ENERGY BASS CABINET
MB58R 104 ENERGY Product code: MBL100098Y The MB58R 104 ENERGY features 4x10"Markbass Neodymium custom speakers and 1"driver with horn, boasts an impressive 800W of power handling and weights 36.4 lbs / 16.5 kg . This cabinet works great on its own, plus the 8ohm version makes up an amazing stack when added to another Markbass 8 ohm cab (for example, another MB58R 104 ENERGY or a MB58R 151 ENERGY). TECHNICAL FEATURES: SPEAKER SIZE 4×10” Markbass Neodymium Custom TWEETER 1” driver w/custom horn CAB POWER HANDLING (AES STANDARD) 800W RMS CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONCE 35Hz to 20KHz SENSITIVITY DB SPL 103dB IMPEDANCE 8 or 4 ohms REFLEX Rear DIMENSIONS 22.76”/ 57.8cm (w); 23.62”/ 60 cm (h); 18.50”/ 47 cm (d) WEIGHT 36.4 lbs / 16.5 kgMARKBASS MB58R 104 ENERGY BASS CABINET -
MARKBASS MARCUS MILLER CMD 101 MICRO 60 BASS COMBO AMP
MARCUS MILLER CMD 101 MICRO 60 Product code: MBC105036Z This compact combo amp section also features gain and master controls, 3- band EQ, aux in, headphone out, speaker on/off switch. TECHNICAL FEATURES: PREAMP Solid State AMP OUTPUT POWER (MPT) 60W @ 4 ohm / 45W @ 8 ohm CONTROLS Gain – Master EQ (±16DB) LOW (40 HZ) | MID (800HZ) | HIGH (6 KHZ) SPEAKER 1 x 10″ Markbass Custom TWEETER Piezo SPEAKER POWER HANDLING (AES STANDARD) 200W RMS REFLEX Rear IMPEDANCE 8 ohms CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONCE 45Hz to 18KHz OTHER FEATURES Aux IN – Headphone OUT XLR Line Out – Speaker ON/OFF Output for external cab (minimum load 8Ω) Dual Voltage Switch 120V/240V* *(not available on the 100V version manufactured for Japan) DIMENSIONS 14.56”/ 37cm | 13.14”/ 33,4cm | 14.40”/ 36,6cm WEIGHT 25.6lbsMARKBASS MARCUS MILLER CMD 101 MICRO 60 BASS COMBO AMP -
MARKBASS CMB 101 BLACK LINE- COMBO AMP
CMB 101 Black Line Product code: MBC105104Z The CMB101 Black Line is an amazing entry level 40W combo, the perfect choice for those who want to start with the right sound. It's compact, light, portable and the sound it delivers is superior to any other practice amp at this price thanks to Markbass tone and quality. It features a headphone output, and an aux input for connecting your favourite media players to mix with your bass sound, letting you practice anywhere, anytime. TECHNICAL FEATURES: SPEAKER 1×10” EQ 4-band CONTROLS GAIN | MASTER VOLUME SCOOPED and BOOST switches OTHERS AUX IN HEADPHONE OUT PREAMP OUT OUTPUT POWER 40W DIMENSIONS 14.76”/ 37.5cm (w); 14.37”/ 36.5 cm (h); 10.63”/ 27 cm (d) WEIGHT 21.38 lbs / 9.7 kgMARKBASS CMB 101 BLACK LINE- COMBO AMP -
MARKBASS LITTLE MARK VINTAGE 1000-BASS AMP HEAD
Little Mark Vintage 1000 Product code: MBH110093Z This 1000W high-power head is created for those who need the highly appreciated features and lot of tone options of the LITTLE MARK VINTAGE but also like to have a massive supply of power, no matter how big is the stage and the volume you play! TECHNICAL FEATURES: INPUTS INPUT: impedance 500 Kohm, max. voltage 9 Vpp EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp CONTROLS GAIN: -46 dB to +23 dB range MASTER VOLUME DI LEVEL LIMITER (from 0 to MAX) GROUND LIFT (switch on rear panel) PRE/POST EQ (switch on rear panel) 3-WAY SWITCH (FLAT/CUT/OLD) EQUALIZATION LOW: center frequency: 68 Hz; level: ±16 dB LOW MID: center frequency: 400 Hz, level: ±16 dB HIGH MID: center frequency: 2200 Hz, level: ±16 dB HIGH: center frequency: 10 KHz, level: ±16 dB OUTPUTS LINE OUT / DI: balanced XLR, 600 Ohm transformer output – Maximum Voltage 12 Vpp EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ) TUNER OUT: unbalanced, max. voltage 2 Vpp SPEAKER OUT: speakon comboMARKBASS LITTLE MARK VINTAGE 1000-BASS AMP HEAD
Bass Guitar Amps
