This website uses cookies to ensure you get the best experience on our website. Read more
-
Hartke HyDrive HD410 - 1,000-watt 4x10" Bass Cabinet
25% Off
The Hartke HyDrive HD410 weighs in at a mere 63 pounds, yet there's nothing lightweight about its performance. This 1,000-watt cabinet delivers clean output and even response, thanks to its two-piece composite cones. Double-roll curvilinear surrounds prevent over-excursion, yielding extremely smooth mids, as well as clear fundamentals and natural overtones. Experience tight, chest-thumping low end and superior projection, by virtue of the HD410's round-wire voice coils and sealed cabinet design. Beyond that, this road-ready bass cab features solid plywood construction with extensive bracing and dado joints, as well as a perforated steel grill and steel corners. The HyDrive HD410 is loaded with every feature a modern bassist could want.HD410 -
-
Hartke 210XL Bass Cabinet
32% Off
Professionals choose the XL Series because of its carefully calibrated and tuned cabinet design and high quality aluminum-cone drivers. XLs produce a smooth response along with the clear, punchy attack that changed the sound of bass. Each cabinet is built tough with a shockproof metal grill, reinforced corners, recessed carry handles and a rugged covering.210XL -
MARKBASS MB58R 104 Pure Box 4ohm
Markbass MB58R 104 PURE Box (4 Ω)
The Markbass MB58R 104 PURE (4 Ω) is a high-performance 4x10” bass cabinet designed for players who want powerful sound with minimal weight. Equipped with neodymium custom speakers and a hi-fi tweeter, it delivers clear highs, strong mids, and deep low-end. With 800 watts of power handling and a rear-ported, eco-friendly enclosure, this cabinet is perfect for stage, studio, or rehearsal environments where portability and clarity matter.
Specifications
Speaker Configuration: 4 × 10″ neodymium custom speakers
Tweeter: Hi-Fi tweeter
Power Handling: 800 watts RMS
Frequency Response: 40 Hz – 20 kHz
Crossover Frequency: 3.5 kHz
Sensitivity: 103 dB SPL
Impedance: 4 Ohms
Enclosure: Rear-ported, biodegradable material
Dimensions: 57.8 × 60 × 47 cm
Weight: 16.1 kg (35.5 lb)
MBL100117 -
MARKBASS MB58R 104 PURE Box 8ohm
Markbass MB58R 104 PURE Box (8 Ω)
The Markbass MB58R 104 PURE is a rugged yet ultralight 4×10″ bass cabinet built for players who demand high output and effortless transport. It features neodymium custom speakers paired with a hi‑fi tweeter for detailed highs and quick transient response. With a rear-ported enclosure and biodegradable construction materials, this cabinet delivers 800 W RMS power handling without heavy weight, making it an excellent choice for gigs, rehearsal, or compact rig setups.
Specifications
Speaker configuration: 4 × 10″ neodymium custom speakers
Tweeter type: Hi‑fi tweeter
Power rating: 800 W RMS (AES standard)
Frequency response: approx. 35 Hz – 20 kHz
Crossover frequency: around 3.5 kHz
Sensitivity: approximately 103 dB SPL
Impedance: 8 Ω (also available in 4 Ω)
Enclosure: rear‑ported, eco‑friendly composite material
Dimensions: about 57.8 × 60 × 47 cm (22.8″ × 23.6″ × 18.5″)
Weight: ~35.5 lb (≈ 16.1 kg)
MBL100104 -
Markbass MB58R 104 Energy-4
Markbass MB58R 104 Energy-4 PRODUCT CODE: MBL100114YThe MB58R series is a further example of how Markbass is always one step ahead in innovating using state-of-the-art technologies. Once again Marco De Virgiliis with his pioneering soul has managed to create this new series of products which, with the use of custom components born thanks to years of experience and research Markbass and the use of revolutionary materials with an eye to the future and the evironment, has really nailed the tone and power versus portability issue.
The MB58R 104 ENERGY features 4x10"Markbass Neodymium custom speakers and 1"driver with horn, boasts an impressive 800W of power handling and weights 36.4 lbs / 16.5 kg . This cabinet works great on its own, plus the 8ohm version makes up an amazing stack when added to another Markbass 8 ohm cab (for example, another MB58R 104 ENERGY or a MB58R 151 ENERGY).markbass mb58r 104 energy-4 -
MARKBASS NEW YORK 121-COMPACT CABINET
Product code: MBL100026Y New York 121 The Mini CMD 121P, has found its perfect companion! This is our lightest and most compact cabinet ever, and serves as a great extension cabinet for our combos: with this cab added, your combo turns into a 500W rig! This is also a small but mighty match for any of our 250-500W heads. SPECIFICATIONS: Power handling 400w Series New york Size S Speaker config 1x12" Impedance 8ohm Tweeter Piezo Tuned port Rear TECHNICAL FEATURES IMPEDANCE 8 ohms SPEAKER SIZE 1×12 in. BASS PORT rear TWEETER piezo POWER HANDLING 400W RMS (AES Standard) CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONSE 45 Hz to 18 kHz SENSITIVITY 100 dB SPL WEIGHT 29.98 lbs / 13.6 Kg WIDTH 14.96 in. / 38 cm HEIGHT 16.73 in. / 42.5 cm DEPTH 14.17 in. / 36 cmMARKBASS NEW YORK 121-COMPACT CABINET -
MARKBASS MB58R 104 ENERGY BASS CABINET
MB58R 104 ENERGY Product code: MBL100098Y The MB58R 104 ENERGY features 4x10"Markbass Neodymium custom speakers and 1"driver with horn, boasts an impressive 800W of power handling and weights 36.4 lbs / 16.5 kg . This cabinet works great on its own, plus the 8ohm version makes up an amazing stack when added to another Markbass 8 ohm cab (for example, another MB58R 104 ENERGY or a MB58R 151 ENERGY). TECHNICAL FEATURES: SPEAKER SIZE 4×10” Markbass Neodymium Custom TWEETER 1” driver w/custom horn CAB POWER HANDLING (AES STANDARD) 800W RMS CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONCE 35Hz to 20KHz SENSITIVITY DB SPL 103dB IMPEDANCE 8 or 4 ohms REFLEX Rear DIMENSIONS 22.76”/ 57.8cm (w); 23.62”/ 60 cm (h); 18.50”/ 47 cm (d) WEIGHT 36.4 lbs / 16.5 kgMARKBASS MB58R 104 ENERGY BASS CABINET -
MB58R 122 ENERGY
Powerful Tone. Exceptional Portability. Eco-Friendly Design.
The Markbass MB58R 122 ENERGY is a high-performance bass cabinet that combines robust sound output with a lightweight, environmentally conscious design. Equipped with two 12" neodymium custom speakers and a 1" driver with a horn, this cabinet delivers 800W RMS of rich, full-range tone suitable for various musical applications. Its innovative construction ensures durability while keeping the weight at just 17.5 kg, making it an ideal choice for gigging musicians.
Key Features:
Speaker Configuration: 2×12" Markbass Neodymium Custom
Tweeter: 1" Driver with Horn
Power Handling: 800W RMS (AES Standard)
Frequency Response: 45 Hz – 20 kHz
Crossover Frequency: 3.5 kHz
Sensitivity: 103 dB SPL
Impedance Options: 4 or 8 Ohms
Reflex: Rear
Dimensions: 57.8 cm (W) × 60 cm (H) × 47 cm (D)
Weight: 17.5 kg
Construction: Eco-friendly, lightweight materials
Origin: Made in Italy
MB58R 122 ENERGY -
MARKBASS MB58R 102 XL ENERGY- BASS CABINET
The Markbass MB58R 102 XL ENERGY is a lightweight, high-performance 2x10" bass cabinet designed for musicians seeking powerful sound and easy portability. Equipped with two 10" neodymium custom speakers and a 1" driver with horn, it delivers 400W RMS of clear, punchy tone across a wide frequency range.
Key Features:
Speakers: 2x10" Markbass neodymium custom
Tweeter: 1" driver with horn
Power Handling: 400W RMS
Frequency Response: 40Hz – 20kHz
Sensitivity: 101 dB SPL
Crossover Frequency: 3.5 kHz
Impedance: Available in 4 or 8 ohms
Dimensions: 57.8 cm (W) x 60 cm (H) x 47 cm (D)
Weight: Approximately 14.6 kg (32.2 lbs)
MBL100127Y -
MB58R 151 ENERGY
Deep Tone. Ultra-Lightweight. Road-Ready.
The MB58R 151 ENERGY delivers rich, full-bodied bass in a compact, eco-friendly design. Featuring a custom 15" neodymium speaker and a 1" high-frequency driver, this cabinet offers 400W RMS power handling, ensuring clarity and punch across the frequency spectrum. Its innovative construction provides an exceptional power-to-weight ratio, making it ideal for gigging musicians seeking portability without compromising sound quality.Key Features:
Speaker Configuration: 1×15" Markbass Neodymium Custom
Tweeter: 1" driver with custom horn
Power Handling: 400W RMS (AES Standard)
Frequency Response: 40 Hz – 20 kHz
Crossover Frequency: 3.5 kHz
Sensitivity: 100 dB SPL
Impedance: 8 Ohms
Construction: Eco-friendly, ultra-lightweight materials
Dimensions: 57.8 cm (W) × 60 cm (H) × 47 cm (D)
Weight: 15.2 kg
MBL10010Y -
Markbass 121HR Bass Cabinet
The Standard 121 HR is a 1x12" rear tuned ported cabinet with a warm, focused and natural sound.
It’s a perfect choice for many stage situations as its wedge design allows to use it either as a floor monitor or on its side in standard position.
With its 400 watts of power handling it can be used as a standalone with a Markbass head or as extension cabinet for our topselling Mini CMD 121P combo, it’s a versatile and very portable solution (weights only 29.1lbs/13.2Kg) that covers all of your needs and also ideal for double bass and acoustic bass as sound the of acoustic instruments is faithfully reproduced by this amazing cabinet.AMP-BM-STAND-121HR -
Markbass Miller 104 Cabinet Amp
This rear-ported cab has full, controlled bottom end and smooth and crisp highs that are never harsh or brittle.
It boasts an impressive 800 watts of power handling, and weighs only 48.94 lbs.
It truly is a leader in its field for medium and larger stages and venues due to its sound, power, portability and new wedge design... we’re confident this cabinet will set a new standard for 4x10s.AMP-BM-MILL-104CAB -
Markbass Traveler 121H Bass Cabinet
17% Off
This rear-ported cab has full, controlled bottom end and smooth and crisp highs that are never harsh or brittle.
It boasts an impressive 800 watts of power handling, and weighs only 48.94 lbs.
It truly is a leader in its field for medium and larger stages and venues due to its sound, power, portability and new wedge design... we’re confident this cabinet will set a new standard for 4x10s.AMP-TRAV-104H-CAB -
Markbass Standard 108HR Bass Cabinet
16% Off
The legendary 8x10 cabinet was always the heaviest piece of gear a band ever had to carry. But thanks to technology developed by Markbass, we have entered a new era of lightweight bass gear. And best of all, the heaviness of the sound has not been sacrificed along the way! The biggest and loudest of Markbass cabinets can hold its own on any stage, but is portable enough for around-town use.AMP-BM-STAND-108HR -
Markbass Standard 104HF Bass Cabinet
The Standard 104HF is one of our most popular cabinets and, for many players, it sets a new standard for 4x10s. Hear the miracle of neodymium speakers by playing through this cabinet... then FEEL the miracle when you pick it up! The Standard 104HF is a leader in its field due to its sound, power and portability. But you don't have to trust us; let your ears and your lower back be the judge!
AMP-BM-STAND-104HF -
MARKBASS STANDARD 104 HR 4 ohm - BASS SPEAKER CABINET
13% Off
PRODUCT CODE: MBL100002Y Markbass Standard 104HR Rear-Ported Neo 4x10 Bass Speaker Cabinet 4 Ohm The Standard 104HR - 4 is an excellent 4 x 10″ cabinet with a power handling capacity of 800 watts. With a detailed sound and their performance it's well suited and appreciated for clubs and small to medium-sized stages. TECHNICAL FEATURES: WOOFER 4 x 10″ Markbass Neodymium Custom TWEETER 1″ driver w/ custom horn TWEETER CONTROL Rotary knob POWER HANDLING (AES STANDARD) 800W RMS CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONSE 35 Hz to 20 kHz SENSITIVITY DB SPL 103 dB IMPEDANCE 4 ohms BASSREFLEX Rear DIMENSIONS Width: 23.23 inch / 59 cm Height: 23.54 inch / 59.8 cm Depth: 18.98 inches / 48 cm WEIGHT 48.28 lbs / 21.9 kgMBL100002Y -
Markbass MB58R 102 P
The MB58R series is a further example of how Markbass is always one step ahead in innovating using state-of-the-art technologies. Once again Marco De Virgiliis with his pioneering soul has managed to create this new series of products which, with the use of custom components born thanks to years of experience and research Markbass and the use of revolutionary materials with an eye to the future and the evironment, has really nailed the tone and power versus portability issue.
The MB58R 102 P features 2x10"Markbass classic ceramic speakers and a new piezo tweeter. The P series is created for those who like classic speakers but don’t want to carry heavy stuff, thanks to the revolutionary material used for the cabinet enclosure, the MB58R 102Pweighs only 28 lbs / 12.7 kg!markbass-mb58r-102-p
Bass Guitar Amps
