Designed specifically for use with Samson SRK Pro Racks (sold separately), the Samson SRK Pro Plexi Rack Doors are available in four sizes to accommodate any SRK Pro Rack setup

Mounting bracket for wall or ceiling fastening, or for fixing onto loudspeaker stands.

Adaptor for mounting on standard tripods with 35 mm (1 3/8”) diameter.

TV-spigot for mounting onto lighting stands or G-clamps and truss bars.

Wall bracket, can be tilted horizontally and vertically, tightens with bolts.

Tilting adaptor to tilt monitor in center of gravity up to max. 18° (13° for O 500 C). Has M20 thread for ceiling mount .

Adapter to fit the loudspeaker onto a tripod stand. Can be used with the LH 28, LH 29, or LH 37. Adding an LH 36 gives a tilting function.

Adapter to mount an LH 42, or LH 47 + other LH hardware onto a surface such as a ceiling.

'L' shaped adapter to mount a loudspeaker onto a wall.

Mounting hardware to vertically position a loudspeaker suspended off a ceiling.

Mounting adaptor plate to fit the LH 43, LH 45 or LH 46 with LH 12, LH 15, LH 25, LH 26, LH 28, LH 29, LH 38, LH 45, LH 61 and LH 80.

Tripod adaptor plate (115 mm) to mount on König & Meyer tripods No. 26790 and No. 26795.

A mounting adapter with a M8 hole spacing of 70 mm to fit onto the loudspeaker, M8 hole spacings of 115 mm onto an LH 28, LH 29, LH 37, LH 47, LH 48 or K&M Design Stand, and a 3/8” thread for a microphone stand. Vertical adjustment is also possible over the range ±20°. The centre of gravity is centered over the middle of the loudspeaker/microphone stand so it is not unstable.

An adapter to convert a pair of 70 mm spaced M8 mounting points to the standard Omnimount 75, VESA 75, and VESA 100 mounting points.

Table stand with horizontal and vertical angling, and height adjustment.

The black GKH 310 Metal Grille from Neumann is designed to protect the drivers of the KH 310 A Active Studio Monitor.

ADAM Audio also offers desktop stands that have been specifically designed to optimize the acoustics of the A3X when used in desktop applications and alike. The stands minimize reflections from the desktop and maximize the amount of direct sound.

ADAM Audio also offers desktop stands that have been specifically designed to optimize the acoustics of the A5X when used in desktop applications and alike. The stands minimize reflections from the desktop and maximize the amount of direct sound.

The ISO-L8R430 isolation stands are designed for large studio monitors as well as guitar and bass amps