Sennheiser HME26-II-100(4) P48 Professional Broadcast Headset & Condenser Microphone

The HME 26-II models apply to the requirements of most demanding broadcast applications.

The pre-polarized condenser microphone features brilliant acoustic performance for crystal clear audio transmission in highest broadcast quality and has an excellent feedback rejection. 
The closed, supra-aural headphones have a high maximum SPL and are equipped with the ActiveGard©. This limiter can be activated or deactivated.

FEATURES

• Lightweight with extra soft cushions and excellent wearing comfort

• Headphones with very accurate sound reproduction for professional applications

• Microphone for crystal clear audio transmission in highest broadcast quality

• ActiveGard© (on/off switch) for protected hearing

• High passive noise attenuation

• Reliable performance over long lifetime for safe investments

• Swiveling ear cap allows single sided listening

• Microphone can either be worn on right or left hand side

• Modular concept of boom, cable and cushions for highest flexibility

Product Specs

• Impedance

  100 Ohm stereo (headphones) 
  600 Ohm stereo (headphones) 

• Characteristic SPL

  1 kHz, 1 mW: 105 dB 
  1 kHz, 1 V: 115 dB 
  1 kHz, 1 V: 107 dB 

• Pick-up pattern

  omnidirectional (BKE 4-2) 
  cardioid (BKE 4-4) 

• • Max. Sound pressure level (active)

    ActiveGard™ switched off: 128 dB at 1 kHz, 200 mW 
    ActiveGard™ switched off: 127 dB at 1 kHz, 200 mW 
    ActiveGard© activated: 105 dB at 1 kHz, 200mW 

  • Frequency response (microphone)

    40 to 20.000 Hz 

  • Transducer principle (Microphone)

    pre-polarized condenser microphone 

  • Frequency response (headphones)

    40 to 18.000 Hz 

  • Contact pressure

    3,9 N 

  • Ear coupling

    supra-aural 

  • Weight

    (w/o cable and w/o connector) approx. 205 g 

  • Min. terminating impedance

    4700 Ω 

  • Storage temperature

    -55 °C to 70 °C 

  • Operating temperature

    -15 °C to 55°C 

  • Maximum sound pressure level (passiv)

    150 dB; 0,5 % THD 

  • Output voltage

    4 mV / Pa +/- 2,5 dB 

  • Operating voltage (stand alone)

    5 - 15 V DC 

  • Transducer principle (headphones)

    dynamic, closed