This website uses cookies to ensure you get the best experience on our website. Read more
Neumann KM 183 MT Microphone - Matte Black
Neumann KM183 Condenser Mini Mic, omnidirectional, Matte Black
The matte black KM 183 MT Microphone from Neumann is an omnidirectional, pressure condenser microphone intended for live sound reinforcement and broadcast as well as recording applications. The KM 180 series microphones feature an output stage based on the KM 100. Transformerless circuitry and balanced output result in high output gain with a very low noise floor and no coloration to the output signal.
The KM 183 is powered via +48V phantom power. Its 20 Hz to 20 kHz frequency response provides flexibility for use in a wide range of recording situations. The KM 183's omnidirectional polar pattern provides a generous pick up area and is suitable for X,Y (with cardioid mic and baffle plate) stereo miking, ambiance miking or spot miking instruments such as piano, wind instruments organ and choir. The KM 183 handles sound pressure levels up to 140 dB allowing close miking of instruments high in transient (peak) level response.
Product Specs
Operating Principle | Pressure Gradient |
Transducer | Condenser |
Polar Pattern | Omnidirectional |
Frequency Range | 20 Hz to 20 kHz |
Signal to Noise Ratio | 69 dB CCIR 81 dB A-Weighted |
Equivalent Noise Level | 25 dB CCIR 13 dB A-Weighted |
Maximum SPL | 135 dB SPL 0.5% |
Impedance | 50 ohms |
Load Impedance | 1 kOhms |
Sensitivity | 12 mV/PA @ 1 kHz into 1 kOhms |
Power Requirements | 48 V+/- 4 V |
Output Connectors | 3-pin XLR |
Operating Current Consumption | 3.2 mA |
General | |
---|---|
Length | 4.21" (107 mm) |
Diameter | 0.87" (22 mm) |
Weight | 2.82 oz (80 g) |
Write Your Own Review