This website uses cookies to ensure you get the best experience on our website. Read more
Neumann KM 185 MT Microphone Stereo Set - Black
The black KM 185 MT Microphone from Neumann is a hypercardioid pattern, pressure gradient condenser microphone intended for live sound reinforcement and broadcast, as well as recording applications.
The black KM 185 MT Microphone from Neumann is a hypercardioid pattern, pressure gradient condenser microphone intended for live sound reinforcement and broadcast, as well as recording applications.
The KM 180 series microphones feature an output stage based on the KM 100. Transformerless circuitry and balanced output result in high output gain with a very low noise floor and no coloration to the output signal.
The KM 185 MT is powered via +48V phantom power. Its 20 Hz to 20 kHz frequency response provides flexibility for use in a wide range of recording situations. The KM 185 provides attenuation at the off-axis sections of the mic, and is suitable for X,Y and ORTF stereo miking, announcer's mic for broadcast, spot capturing of drum overheads, strings, wind instruments, percussion, piano, and amp cabinets. The KM 185 handles sound pressure levels up to 142 dB allowing close miking of instruments high in transient (peak) level response.
Product Specs
Operating Principle | Pressure Gradient |
Transducer | Condenser |
Polar Pattern | Hypercardioid |
Frequency Range | 20 Hz to 20 kHz |
Signal to Noise Ratio | 70 dB CCIR 79 dB A-Weighted |
Equivalent Noise Level | 24 dB CCIR 15 dB A-Weighted |
Maximum SPL | 142 dB SPL 0.5% |
Impedance | 50 ohms |
Load Impedance | 1 kOhms |
Sensitivity | 10 mV/PA @ 1 kHz into 1 kOhms |
Power Requirements | 48 V+/- 4 V |
Output Connectors | 3-Pin XLR |
Operating Current Consumption | 3.2mA |
General | |
---|---|
Length | 4.21" (107 mm) |
Diameter | 0.87" (22 mm) |
Weight | 2.82 oz (80 g) |
Write Your Own Review